Table of Contents
Advertisement
C
0
~
w
~
0
Section 1 Operation
1-38
11.
Opecat;o,
To specify the installed optional boards
1
Set the cursor to OPTION INSTALLATION on the MONITOR
CONFIGURATION menu and press the ENT button.
The OPTION INSTALLATION menu I is displayed.
OPTION INSTALLATION 1
•AUTO SETUP
YES
D1 OPTION
YES
D2 OPTION
YES
NTSC DECODER
YES
NTSC COMB ADP
YES
PAL DECODER
YES
PAL COMB ADP
YES
OTHER OPTIONS
SELECT AND PRESS ENT
2
By pressing the
n
button, move the cursor to the board for which
the YES/NO setting must be changed, and press the ENT button.
YES must be displayed for the installed board and NO for
uninstalled boards. Pressing the ENT botton toggles the YES/NO
setting.
Repeat step 2 for the other boards as necessary.
3
Move the cursor to OTHER OPTIONS and press the ENT button.
The
OPTION INSTALLATION
menu 2 is displayed.
OPTION INSTALLATION 2
.PAL-M
DECODER
YES
SECAM DECODER
YES
RGB/COMP 0/P
YES
VITC BOARD
YES
SAFE AREA
YES
BLACK GENER
YES
OTHER OPTIONS
SAVE AND APPLY
SELECT AND PRESS ENT
4
Set YES/NO for the boards listed in menu 2 in the same manner as
with menu I.
5
When the YES/NO setting is completed, move the cursor to SA VE
AND APPLY and press the ENT button.
The message "DATA SAVED" is momentarily displayed and the
monitor returns to normal status.
- Quick Links:
- Table of Contents
- Features
- Operation
- Rear Panel
Hide quick links:
Advertisement
Table of Contents
