Table of Contents
Advertisement
Video outputs
Remote control
Auto set-up
Video signal
DECODER OUT: BNC type (3)
Output decoded signals only when BKM-
1440 is installed.
REMOTE: I 0-pin connector (I)
AUTO SETUP PROBE: 12-pin connector
(I)
Luminance channel (RGB and composite signals)
Differential gain
Within 5% for a luminance from Oto I 03 cd/m
2
Differential phase
Within 5° for a luminance from 0 to I 03 cd/m
2
Frequency response
Monochrome mode: I 00 Hz to 6 MHz ± I dB
( aperture correction at 0)
Color mode: Trap or comb filter removes
frequency in 3.58 MHz region (BVM-1916)
or 4.43 MHz (BVM-2016P) region
RGB mode: 100 Hz to 6 MHz ±I dB
Chrominance channel
Demodulation axis
R-Y, B-Y
Bandpass
1.3 MHz equiband
Subcarrier regeneration
±I
O
(standard input signal)
Phase control range
More than ±15° (standard input signal)
Chroma gain control range
Chrominance/luminance
Time error
Gain error
More than ±6 dB
Less than 30 ns
Less than 5%
Aperture correction
Adjustable continuously up to 6 dB boost at
4.5 MHz or 6.5 MHz (selectable)
DC restoration (RGB and composite signals)
Back porch type
Back porch level: Within I% of peak
luminance, 10% to 90% (average picture
level)
Synchronization
AFC time constant
0.5 ms (fast), 2 ms (normal) or 7 ms (slow)
Line pull range/line hold range
More than ±500 Hz at 0.5 ms time constant
Vertical blanking time
Normal: Within I ms
Underscan: Within 0.8 ms
Horizontal retrace time
Within IO µs
1 . Ope,at;on
11
-45
- Quick Links:
- Table of Contents
- Features
- Operation
- Rear Panel
Hide quick links:
Advertisement
Table of Contents
