Vacon NX series User Manual page 102
Active front end unit (afe)
air cooled
Hide thumbs
Also See for NX series:
- Applications manual (392 pages) ,
- Maintenance manual (65 pages) ,
- User manual (62 pages)
Table of Contents
Advertisement
vacon • 100
Parameter sets
Select
Parameter sets
Wait...
Upload parameters to keypad (To keypad, S6.3.2)
This function uploads all existing parameter groups to the keypad provided that the drive is stopped.
Enter the To keypad page (S6.3.2) from the Parameter copy menu. Pressing Menu button right takes
you to the edit mode. Use the Browser buttons to select the option All parameters and press
the Enter button. Wait until 'OK' appears on the display.
READY
Copy Parameters
P1
READY
Up to keypad
Wait...
Download parameters to drive (From keypad, S6.3.3)
This function downloads one or all parameter groups uploaded to the keypad to a drive provided that
the drive is in STOP status.
Enter the To keypad page (S6.3.2) from the Parameter copy menu. Pressing the Menu button right
takes you to the edit mode. Use the Browser buttons to select either All parameters, All but motor
parameters or Application parameters and press the Enter button. Wait until 'OK' appears on the
display.
The procedure to download the parameters from keypad to Active Front End is similar to that of from
Active Front End to keypad. See Figure 64.
6
READY
READY
Figure 64. Storing and loading of parameter sets
Up to keypad
P4
Select
Up to keypad
OK
Figure 65. Parameter copy to keypad
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
READY
Parameter sets
LoadFactDef
READY
Parameter sets
OK
READY
Up to keypad
All param.
READY
Control Keypad
enter
CONFIRM
CANCEL
11198.emf
READY
CONFIRM
enter
C HAN GE VALUE
C ANC EL
11199.emf
Advertisement
Table of Contents
