Table of Contents
Advertisement
Testing the Starter Solenoid (continued)
Greensmaster 3120
17230SL Rev C
7. When testing is complete, secure the cables and wires to the solenoid.
Tighten the nuts on the solenoid coil posts from 15 to 20 in-lb (1.7 to 2.3
N∙m). Tighten the nuts on the main contact posts from 50 to 60 in-lb (5.7
to 6.8 N∙m).
8. Connect the positive (+) cable to the battery first and then connect the
negative (-) cable to the battery. Coat the wire and cable connections at the
battery and at the starter solenoid with
Battery Terminal Protector (page
Page 5–15
Electrical System: Testing the Electrical Components
5–3).
Advertisement
Chapters
Table of Contents
Troubleshooting
