Chapter 2. Understanding the Keypad, Menu System & Displays
2.3 Working with the Configuration Display
By repeatedly pressing
VIEW MODE - In base-model units this parameter offers five settings. See Section 4.1 on page 36 to select the view to be displayed.
•
DATA RECORDER - When the optional data recorder is installed, setting this parameter to ON activates the file recording capability and
•
the data recorder file display.
MINIMUM ALARM - Enables and sets the minimum alarm value (see Section 3.4 on page 30).
•
MAXIMUM ALARM - Enables and sets the maximum alarm value (see Section 3.4 on page 30).
•
UNITS - Sets the units of measurement to inches or millimeters (see Section 3.2 on page 21).
•
NOMINAL THICKNESS - Sets the nominal thickness value that is then used to calculate and the differential and rate of reduction
•
measurement values when selected by the VIEW MODE parameter (see Section 3.2.3 on page 25).
RESOLUTION - Controls the format (number of decimal places) of the thickness measurement that is displayed and stored in a Data
•
Recorder file.
UPDATE RATE - Sets the rate at which the measurement reading is updated (see Section 3.2.2 on page 24).
•
14
, you can access the Configuration display and you can adjust the following DM5E settings:
DM5E Operating Manual