hit counter script

AEG KSK782220M User Manual page 52

Hide thumbs Also See for KSK782220M:
Table of Contents

Advertisement

Problem
There is no water inside the
grill- / roasting pan after the
descaling procedure.
There is dirty water on the
bottom of the cavity after
the descaling cycle.
The cleaning function is in-
terrupted before it finishes.
The cleaning function is in-
terrupted before it finishes.
There is too much water on
the bottom of the cavity af-
ter the end of the cleaning
function.
There is no good perform-
ance of the cleaning proce-
dure.
There is no good perform-
ance of the cleaning proce-
dure.
There is no good perform-
ance of the cleaning proce-
dure.
14.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
Possible cause
You did not fill the water
drawer to the maximum lev-
el.
The grill- / roasting pan is on
a wrong shelf position.
There was a power cut.
The function was stopped by
the user.
You sprayed too much de-
tergent in the appliance be-
fore the activation of the
cleaning cycle.
The initial oven cavity tem-
perature of the steam clean-
ing function was too high.
You did not remove the side
grids before the start of the
cleaning procedure. They
can transfer heat to the walls
and decrease the perform-
ance.
You did not remove the ac-
cessories from the appliance
before the start of the clean-
ing procedure. They can
compromise the steam cycle
and decrease the perform-
ance.
on the front frame of the oven cavity. Do
not remove the rating plate from the
oven cavity.
ENGLISH
Remedy
Check if the a descaling
agent / water is present in
the water drawer body.
Repeat the procedure.
Remove the residual water
and the descaling agent
from the bottom of the
oven. Put the grill- / roasting
pan on the first shelf posi-
tion.
Repeat the procedure.
Repeat the procedure.
Cover all parts of the cavity
with a thin layer of the deter-
gent. Spray the detergent
evenly.
Repeat the cycle. Run the cy-
cle when the appliance is
cold.
Remove the side grids from
the appliance and repeat the
function.
Remove the accessories
from the appliance and re-
peat the function.
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents