Heat Sink/Cpu - Toshiba PORTEGE M400 Maintenance Manual

Toshiba personal computer

Hide thumbs Also See for PORTEGE M400:

4.18 Heat sink/CPU

Removing the Heat sink/CPU

The following describes the procedure for removing the heat sink/CPU. (See Figure 4-32 and

1. Turn over the system board.

2. Remove the following screws securing the CPU hold plate in the reverse order of the

numbers marked on the CPU hold plate and remove the CPU hold plate.

CAUTION: Remove the screws in the order of mark "3", "2" and "1" on the CPU

PORTEGE M400 Maintenance Manual (960-541)

M2.0x4.0B BIND

Figure 4-32 Removing the heat sink

4 Replacement Procedures

M2.0x4.0B BIND

CPU hold plate

[CONFIDENTIAL]