Table of Contents
Advertisement
HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Follow-up Procedure
Check the following items after the installation is complete:
2.4.4 Installing Hard Disk Units
This section describes how to install hard disk units (SM-HDD-SAS300G-A) for the first time
to avoid hard disk damage.
Background
Tools
Precautions for the use of hard disks
Installing One Hard Disk Unit
The methods of installing hard disk units in the HDD0 and HDD1 slots are the same. The
following example uses the HDD1 slot.
Step 1 Remove the filler panel from a hard disk slot.
Issue 03 (2015-01-26)
The expansion card is reliably inserted into the slot, and the blots are tightened.
Filler panels are inserted in vacant slots. You must insert filler panels in the vacant slots
on the USG to prevent dust and ensure heat dissipation.
Phillips screwdriver
ESD bag
Use EdgeWave hard disks. The system cannot recognize the hard disks provided by other
vendors.
Wear an ESD wrist strap to protect the USG and hard disks from electrostatic damage.
Hold the two side surfaces of a hard disk, do not touch the PCB board or squeeze the hard
disk, and do not vibrate, bump, or stack hard disks.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Hardware Installation
207
- Quick Links:
- Device Overview
- Usg6300 Product Series
Hide quick links:
Advertisement
Table of Contents
