Table of Contents
Advertisement
64
Getting Started
Turning off the computer
❖
If you have work in progress and are not connected to a
network, use the Windows Standby or Hibernate commands
to save your system settings to memory so that, when you turn
on the computer again, you will automatically return to where
you left off.
❖
To leave the computer off for a longer period, you can use the
Windows Turn Off command when not connected to a
domain server or the Shut down when connected to a domain
server instead.
CAUTION: Never turn off the computer while any drive is in
use. Doing so may damage the media in use and result in
loss of data. For more information, see
computer" on page 99.
Closing the display panel
When you are finished, shut the computer down and close the
display panel to keep dust and dirt out of the computer.
If you close the computer while it is still on, these actions will
occur:
❖
If you have the LCD power-saver feature set, the LCD panel
will automatically turn off until you open it again.
❖
If you have the audible warning set, the computer will beep to
notify you that it is still on.
❖
If you have an action feature set, the computer will perform
either: Nothing, Standby, Hibernate, or Turn Off (see
"Enabling Hibernation" on page
"Powering down the
177).
Advertisement
Table of Contents
