Page 3
IEC 825 and EN60825 on class 1 laser product. This computer is equipped with the optical drive in the following list according to the model. Manufacturer Type TOSHIBA SD-C2612 TEAC DW-224E Panasonic Communications UJDA740 Panasonic Communications UJ-810 Satellite Pro M10 Series...
User's Manual General Precautions TOSHIBA computers are designed to optimise safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury, damage to the computer or impaired performance.
Page 5
Read additional restrictions in bundled documents. Contact TOSHIBA Service and Support for more information. Pressure or impact damage Do not apply heavy pressure to the computer or subject it to strong impact.
EMC (Electromagnetic compatibility) and safety standards. However, Toshiba should not guarantee that this product still observes these EMC standards if options or cables not produced by Toshiba are connected or implemented. In this case the persons who have connected / implemented those options / cables have to assure that the system (PC plus options / cables) still fulfils the required standards.
Page 7
The hookflash (timed break register recall) function is subject to separate national type approval. It has not been tested for conformity to national type regulations, and no guarantee of successful operation of that specific function on specific national networks can be given. Satellite Pro M10 Series...
Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9
Pour les enregistrements et licences, veuillez contacter I’IBPT. Deutschland: License required for outdoor installations. Check with reseller for procedure to follow Anmeldung im Outdoor-Bereich notwendig, aber nicht genehmigungspflichtig. Bitte mit Händler die Vorgehensweise abstimmen. Satellite Pro M10 Series...
Page 10
Caution: Exposure to Radio Frequency Radiation. The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimised.
TOSHIBA is not responsible for any radio or television interference caused by unauthorised modification of the devices included with this TOSHIBA Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by TOSHIBA.
Page 12
2. In case that RF interference occurs to Other Radio Stations from this equipment, please change promptly the frequency for use, place to use, or stop emitting Radio. 3. Please contact TOSHIBA Direct PC if you have a problem, such as interference from this equipment to Other Radio Stations.
Page 13
Radio Law of Japan. The following restrictions apply: ■ Do not disassemble of modify the device. ■ Do not remove the authorisation label from the device. Satellite Pro M10 Series xiii...
User's Manual Information to Bluetooth users Bluetooth wireless technology Interoperability Bluetooth™ Card from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ■...
être utilisé à l’interieur et loin des fenêtres afin de founir un écran de blindage maximal. Au cas aù un installation en plain air, le materiel doit faire l’objet d’une licence. Satellite Pro M10 Series...
Page 16
User's Manual EU Declaration of Conformity Toshiba declares, that this product conforms to the following standards: Supplementary “The product complies with the requirements of the Information: Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC and/or the R&TTE Directive 1999/05/EEC.”...
Table of Contents Satellite Pro M10 Series Table of Contents Preface ..................xxv Manual contents................... xxv Conventions..................xxvi Abbreviations..................xxvi Icons ....................xxvi Keys....................xxvi Key operation ..................xxvii Display .....................xxvii Messages ..................xxvii Chapter 1 Introduction..............1-1 Equipment checklist ................1-1 Hardware ...................1-1 Software ....................1-2 Features ....................1-3 Special features .................1-9...
Page 18
CD-RW/DVD-ROM drive ..............2-16 DVD Multi drive................2-18 CD-R/RW drive ................2-19 Slim Select Bay HDD adaptor ............2-20 Slim Select Bay 2nd battery pack ...........2-20 TOSHIBA Bridge media adaptor .............2-21 Weight saver..................2-21 AC adaptor...................2-22 Chapter 3 Getting Started ............3-1 Setting up your work space ..............3-2 General conditions................3-2...
Page 19
Before writing or rewriting ...............4-17 When writing or rewriting..............4-18 Drag’n Drop CD ................4-19 Data Verification ................4-19 Video (DVD-R/-RW/-RAM)...............4-20 Media care ...................4-21 CD/DVDs ..................4-21 Diskettes..................4-21 Using the microphone.................4-22 Modem ....................4-22 Region selection ................4-23 Properties menu ................4-24 Connecting ..................4-25 Disconnecting..................4-25 Satellite Pro M10 Series...
Page 20
Emulating Fn key on external keyboard ..........5-6 Fn Sticky key ..................5-6 Windows special keys................5-7 Keypad overlay ..................5-7 Turning on the overlays ..............5-7 Temporarily using normal keyboard (overlay on) .......5-8 Temporarily using overlay (overlay off) ..........5-8 Temporarily changing modes ............5-9 Generating ASCII characters..............5-9 Satellite Pro M10 Series...
Page 21
HW Setup window .................7-2 General ....................7-3 Device Config ..................7-3 Parallel/Printer ...................7-3 Display ....................7-4 CPU ....................7-4 Boot Priority..................7-5 Keyboard ...................7-7 USB ....................7-8 LAN....................7-8 TOSHIBA Password Utility..............7-9 User password ..................7-9 Supervisor password...............7-10 Starting the computer by password ..........7-11 Satellite Pro M10 Series...
Page 22
Inserting an SD card ................8-4 Removing an SD card................8-5 SD card care..................8-6 Memory expansion................8-6 Installing memory module..............8-7 Removing a memory module.............8-8 TOSHIBA Bridge media adaptor ............8-9 Before installing .................8-9 Installing ....................8-9 Removing..................8-10 Memory card inserting/removing.............8-11 CompactFlash .................8-11 Memory Stick ..................8-12 SmartMedia ..................8-13...
Page 23
CD-RW/DVD-ROM drive ..............9-10 DVD Multi drive................9-11 CD-R/RW drive-option ..............9-13 Diskette drive...................9-14 PC card....................9-14 SD card....................9-15 Infrared port..................9-15 Printer ....................9-15 TOSHIBA Dual Pointing Device ............9-16 USB ....................9-18 Memory expansion ................9-18 Sound system..................9-18 TV output signal................9-19 Monitor ....................9-19 i.LINK (IEEE1394)................9-20 Modem ....................9-20 LAN....................9-21...
Page 24
Table of Contents Appendix A Specifications ............A-1 Appendix B AC Power Cord and Connectors ....... B-1 Appendix C The TOSHIBA International Warranty ....C-1 Appendix D Keyboard Layouts ..........D-1 Appendix E Display Controller and Modes......E-1 Appendix F If your computer is stolen ........
This manual tells how to set up and begin using your Satellite Pro M10 Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
Preface Chapter 4, Operating Basics, includes instructions on using the following devices: TOSHIBA Dual Pointing Device, Slim Select Bay modules, USB diskette drive, optical media drives, microphone, modem, wireless communication features and LAN. It also provides tips on care of the computer, diskettes and CD/DVDs.
Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment. Please read. A note is a hint or advice that helps you make best use of your equipment. Satellite Pro M10 Series xxvii...
Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
■ TOSHIBA Console ■ Pointing Device Driver ■ Online manual ■ Documentation: ■ Satellite Pro M10 Series Personal Computer User’s Manual ■ Satellite Pro M10 Series QuickStart ■ Microsoft Windows XP Professional manual ■ Safety Instruction Manual ■ Warranty information ■...
Introduction Features The computer uses TOSHIBA’s advanced Large Scale Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and benefits: Processor ■ ®...
Page 31
Data can be rewritten hundreds of thousands of times over the life of a disc. For reading, this drive supports the same formats as the DVD-ROM drive. Refer to chapter 2, The Grand Tour, for details. Satellite Pro M10 Series...
A Touch pad and control buttons in the palm rest enable control of the on-screen pointer and scrolling of windows. This pointer control stick, located in the centre of AccuPoint the keyboard, provides convenient control of the cursor. Satellite Pro M10 Series...
Page 33
The PC card slot accommodates two 5 mm Type II cards or one Type III card. SD card This slot lets you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use SD card flash- memory. Satellite Pro M10 Series...
Page 34
Some computers in this series are equipped with Bluetooth functions. Bluetooth wireless technology eliminates the need for cables between electronic devices such as computers and printers. Bluetooth provides fast, reliable, and secure wireless communication in a small space. Satellite Pro M10 Series...
CD-RW/DVD-ROM drive, DVD Multi drive, optional DVD-R/RW drive, optional Slim Select Bay HDD adaptor, optional Slim Select Bay 2nd battery pack or optional TOSHIBA Style Bay Bridge media adaptor. The TOSHIBA Mobile Extension enables hot insertion of modules when you are using a plug and play operating system.
Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Internet button Press this button to launch an Internet browser. See Chapter 2, The Grand Tour, for details.
Page 37
AC adaptor. You can monitor remaining battery capacity. Use the Battery remaining item of the Power Save Modes window in TOSHIBA Power Saver. Battery save mode This feature lets you save battery power. You...
To start the utility, open the Control Panel, click Printers and Other Hardware and click the TOSHIBA HW Setup icon. TOSHIBA Controls This utility has two sections to let you do the following: ■...
Page 39
Bay modules while the computer is on. To activate the utility, select TOSHIBA Mobile Extension from TOSHIBA Console. TOSHIBA Dual This utility lets you enable/disable the TOSHIBA Pointing Utility Dual Pointing Device and customize its features. ■ To enable or disable the TOSHIBA Dual Pointing Device, press Fn + F9.
PS/2™ mouse and PS/2 keyboard ports, a digital visual interface (DVI) port, i.LINK (IEEE1394) port, line-in jack and line-out jack. The Satellite Pro M10 does not support the DVI port on the Advanced Port Replicator II. Satellite Pro M10 Series...
TOSHIBA Bridge This adaptor lets you insert CompactFlash™, ® media adaptor Memory Stick and SmartMedia memory cards. Refer to Chapter 8, Optional Devices. Satellite Pro M10 Series 1-14...
The Grand Tour Satellite Pro M10 Series Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The figure below shows the computer’s front with its display panel in the closed position.
An indicator on the left side of the slot glows when a card is being accessed. Keep foreign objects out of the SD card slot. A pin or similar object can damage the computer’s circuitry. Satellite Pro M10 Series...
DVD Multi drive, optional DVD-R/RW drive, optional Slim Select Bay HDD adaptor, optional Slim Select Bay 2nd battery pack or optional TOSHIBA Bridge media adaptor can be installed in the Slim Select Bay. A weight saver can be installed when there is no module.
External monitor port This 15-pin port lets you connect an external video display. Parallel port This Centronics-compatible, 25-pin parallel port is used to connect a parallel printer or other parallel device. This port supports Extended Capabilities Port (ECP) standard. Satellite Pro M10 Series...
Page 46
This vent provides an outlet for air pulled through the computer by the fan. Be careful not to block the cooling vent. Also be careful to keep foreign objects out of them. A pin or similar object can damage the computer’s circuitry. Satellite Pro M10 Series...
SelectBay latch. One screw is initially set in the front hole, which is the unlock position. To lock the Slim SelectBay latch, set the screw in the back hole. Use a point size 0 Phillips screwdriver. Satellite Pro M10 Series...
Page 48
Keep foreign objects out of the docking port. A pin or similar object can damage the computer’s circuitry. These holes ensure a proper connection Docking holes between the computer and an optional Advanced Port Replicator II. Satellite Pro M10 Series...
1200 pixels. Refer to Appendix E. When the computer operates on the AC adaptor the display screen’s image will be somewhat brighter than when it operates on battery power. The lower brightness level is intended to save battery power. Satellite Pro M10 Series...
Page 50
TOSHIBA Console Press this button to launch an application button automatically. The default is TOSHIBA Console. TV out Button Press this button to set your display device to TV (Video-out). Press it again to return to LCD.
Power The Power indicator glows green when the computer is on. If you select Standby from Shut Down Windows, this indicator flashes orange (one second on, two seconds off) while the computer shuts down. Satellite Pro M10 Series 2-10...
Page 52
DVD-ROM drive, CD-RW/DVD-ROM drive, DVD Multi drive, CD-R/RW drive, Slim Select Bay HDD adaptor, Slim Select Bay 2nd battery pack or TOSHIBA Bridge media adaptor in the Slim Select Bay. When the secondary battery is in the Slim Select...
Chapter 5, The Keyboard. When the Caps Lock indicator glows, the keyboard is in all-caps mode. CAPS LOCK INDICATOR Caps Lock indicator Caps Lock This indicator glows green when the alphabet keys are locked in uppercase. Satellite Pro M10 Series 2-12...
The external diskette drive should be placed on a flat, horizontal surface when in use. Do not set the drive on an incline greater than 20o while it is operating. Do not set anything on top of the diskette drive. Satellite Pro M10 Series 2-13...
CD-RW/DVD-ROM drive, DVD Multi drive, optional CD-R/RW drive, optional Slim Select Bay HDD adaptor, optional Slim Select Bay 2nd battery pack or TOSHIBA Bridge media adaptor. DVD-ROM drive The full-size DVD-ROM drive module lets you run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor.
Page 56
Code Region Canada, United States Japan, Europe, South Africa, Middle East Southeast Asia, East Asia Australia, New Zealand, Pacific Islands, Central America, South America, Caribbean Russia, Indian Subcontinent, Africa, North Korea, Mongolia China Satellite Pro M10 Series 2-15...
Check the Slim SelectBay indicator or CD-RW/DVD-In-Use indicator when you use the CD-RW/DVD-ROM drive. Do not press the eject button or turn off the computer while the light is glowing. Doing so could damage the CD/DVD or the drive. Satellite Pro M10 Series 2-16...
Page 58
Use either 1, 2, or 4 multi speed CD-RW discs or high-speed 4- to 10- speed discs. The write speed of the high-speed CD-RW discs is maximum 10-speed. Use Drag’n Drop CD to write compact discs. Satellite Pro M10 Series 2-17...
Japan, Europe, South Africa, Middle East Southeast Asia, East Asia Australia, New Zealand, Pacific Islands, Central America, South America, Caribbean Russia, Indian Subcontinent, Africa, North Korea, Mongolia China Use the WinDVD 4 application to view DVD-Video discs. Satellite Pro M10 Series 2-18...
Check the Slim SelectBay indicator when you use the CD-R/RW drive. Do not press the eject button, disconnect a drive or turn off the computer while the light is glowing. Doing so could damage the CD or the drive. Satellite Pro M10 Series 2-19...
Bay 2nd battery pack is composed of a battery pack and an adaptor. For details, refer to the documentation accompanying the secondary battery pack. Refer to Chapter 8, Optional Devices, for details on inserting a Slim Select Bay 2nd battery pack. The Slim Select Bay 2nd battery pack Satellite Pro M10 Series 2-20...
TOSHIBA Bridge media adaptor Three types of memory cards, CompactFlash, Memory Stick and SmartMedia can be used in the Bridge media adaptor. Refer to Chapter 8, Optional Devices, for details on using a TOSHIBA Bridge media adaptor. MEMORY STICK SMART MEDIA...
5.0 amperes and 75 watts. Use only the AC adaptor that came with the computer or an approved optional adaptor. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. Satellite Pro M10 Series 2-22...
Getting Started Satellite Pro M10 Series Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space — for your health and safety Be sure also to read the Safety Instruction Manual. This guide, which is included with the computer, explains product liability.
Also, be careful with metal objects, such as bracelets, which can be inadvertently magnetized. ■ Do not operate the computer in close proximity to a mobile phone. ■ Leave ample ventilation room for the fan. Do not block the vents. Satellite Pro M10 Series...
Adjust the back of your chair so it supports the lower curve of your spine. ■ Sit straight so that your knees, hips and elbows form approximately 90 degree angles when you work. Do not slump forward or lean back too far. Satellite Pro M10 Series...
For more information on these topics or for pointers on exercises for such stress points as hands and wrists, please check with your library or book vendor. Also refer to the computer’s Instruction Manual for Safety & Comfort. Satellite Pro M10 Series...
Use only the AC adaptor that came with the computer or an approved optional adaptor. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. 1. Connect the power cord to the AC adaptor.
2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer. Opening the display Satellite Pro M10 Series...
When you first turn on the power, the computer’s initial screen is the Microsoft Windows XP Professional Startup Screen Logo. Follow the on-screen directions. Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby mode. Satellite Pro M10 Series...
For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places in TOSHIBA Power Saver: the Hibernate window and the Battery Alarm item of the Alarm window.
Page 72
First, however, make the appropriate settings according to the steps below. 1. Open the Control Panel. 2. Open Performance and Maintenance and open TOSHIBA Power Saver. 3. Select the Hibernate window, select the Enable Hibernate support check box and click the Apply button.
2. Close the display panel. This feature must be enabled. Refer to the System Power Mode item in Power Saver Utility described in the Control Panel. Open Performance and Maintenance and open TOSHIBA Power Saver. 3. Press the power button. This feature must be enabled. Refer to the System Power Mode item in Power Saver Utility described in the Control Panel.
2. If the computer is already on, press Ctrl + Alt + Del. 3. Press the power button and hold it down for five seconds. Wait 10 to 15 seconds, then turn the power on again by pressing the power button. Satellite Pro M10 Series 3-11...
1. Load the Product Recovery CD-ROM in the optional optical media drive and turn off the computer’s power. 2. Hold down the F12 key and turn on the power. When the TOSHIBA logo appears, release the F12 key. 3. Use the left or right cursor key to select the CD-ROM icon in the displayed menu.
Operating Basics This chapter gives information on basic operations including using the TOSHIBA Dual Pointing Device, USB diskette drive, optical media drives, the microphone, the internal modem, wireless communication, LAN and changing Slim Select Bay modules. It also provides tips on caring for your computer, diskettes and CD/DVDs.
There is a sudden temperature change. ■ Strong stress is applied to the AccuPoint. If an error message appears, reboot the computer. If an error message does not appear, wait a moment for the pointer to stop, then continue operation. Satellite Pro M10 Series...
1. To remove the AccuPoint cap, firmly grasp the cap and pull it straight ACCUPOINT CAP Removing the AccuPoint cap 2. Position a new cap on the peg and press it into place. The peg is square, so be careful to align the cap’s square hole with the peg. Satellite Pro M10 Series...
Connecting the USB diskette drive If you connect the diskette drive after turning on the computer, it will take about 10 seconds for the computer to recognize the drive. Do not disconnect and reconnect before 10 seconds has elapsed. Satellite Pro M10 Series...
CD-RW/DVD-ROM drive, DVD Multi drive, CD-R/RW drive, Slim Select Bay 2nd battery pack, TOSHIBA Bridge media adaptor with separate tray or weight saver. To avoid injury, do not put your hand into the Slim Select Bay slot.
6. Grasp the DVD-ROM drive and slide it out. The DVD-ROM drive and other Slim Select Bay modules can become hot with use. Be careful when removing the module. SLIM SELECT BAY MODULE SLIM SELECT BAY LATCH Removing the DVD-ROM drive Satellite Pro M10 Series...
Use the WinDVD 4 application to view DVD-Video discs. If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on CD-RW/DVD-ROM drive or Writing CD/DVDs on DVD Multi drive sections for precautions on writing to CD/DVDs. Satellite Pro M10 Series...
DVD-ROM drive’s power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button. Ø 1.0mm Manual release with the eject hole Satellite Pro M10 Series...
Page 84
Do not touch the laser lens. Doing so could cause misalignment. Be careful to keep foreign matter from entering the drive. Check the back edge of the tray to make sure it carries no debris before closing the drive. Satellite Pro M10 Series...
Page 85
If the CD/DVD is not seated properly when the drawer is closed, the CD/DVD might be damaged. Also, the drawer might not open fully when you press the eject button. Closing the DVD-ROM drawer Satellite Pro M10 Series 4-10...
2. The CD/DVD extends slightly over the sides of the drawer so you can grasp it. Hold the CD/DVD gently and lift it out. Removing a CD/DVD 3. Push the centre of the drawer to close it. Press gently until it locks into place. Satellite Pro M10 Series 4-11...
RICOH Co., Ltd. Hitachi Maxell Ltd. CD-RW: MITUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.
Set the computer on a level surface and avoid places subject to vibration such as airplanes trains, or cars. Do not use an unstable surface such as a stand. ■ Keep mobile phones and other wireless communication devices away from the computer. Satellite Pro M10 Series 4-13...
DVD Multi drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage. Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/-RW or DVD-R/-RW/-RAM disc that may be caused by writing or rewriting with this product.
Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/-RW and DVD-R/-RW/-RAM disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
Page 91
DVD recorder as well as on your computer’s DVD-ROM drive. You cannot use data discs on a DVD recorder. ■ DVD-RAM formatted by FAT32 cannot be read in Windows 2000 without DVD-RAM Driver Software. Satellite Pro M10 Series 4-16...
Write from the computer’s HDD to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than Drag’n Drop CD, DVDfunSTUDIO and DVD-MovieAlbum is not recommended. Satellite Pro M10 Series 4-17...
Keep mobile phones and other wireless communication devices away from the computer. ■ Always copy data from the HDD to the DVD-RAM. Do not use cut- and-paste. The original data will be lost if there is a write error. Satellite Pro M10 Series 4-18...
The “Record and Verify” function automatically checks whether data has been correctly recorded onto a CD/DVD. “Byte compare” compares the original data file with the data recorded on the CD/DVD and checks that the data completely matches. Satellite Pro M10 Series 4-19...
You can add PAL format images only to a PAL type DVD-RAM and NTSC format images only to an NTSC-type DVD-RAM. ■ You cannot convert a PAL format DVD-RAM to NTSC format or an NTSC type DVD-RAM to PAL format. Satellite Pro M10 Series 4-20...
6. Magnetic energy can destroy the data on your diskettes. Keep your diskettes away from speakers, radios, television sets and other sources of magnetic fields. Satellite Pro M10 Series 4-21...
The internal modem does not support voice functions. All data and fax functions are supported. In case of a lightning storm, unplug the modem cable from the telephone jack. Do not connect the modem to a digital telephone line. A digital line will damage the modem. Satellite Pro M10 Series 4-22...
To select a region, follow the steps below. 1. Click start, point to All Programs, point to TOSHIBA Internal Modem and click Region Select Utility. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.
Select this item to display the dialling properties. If you are using the computer in Japan, the Telecommunications Business Law requires that you select Japan region mode. It is illegal to use the modem in Japan with any other selection. Satellite Pro M10 Series 4-24...
To disconnect the internal modem cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pull out the connector. 2. Disconnect the cable from the computer in the same manner. Satellite Pro M10 Series 4-25...
Radio links You can easily establish links between two or more devices. The link is maintained even if the devices are not within line of sight. Satellite Pro M10 Series 4-26...
If you used the Task Bar to disable W-LAN, restart the computer or follow the procedures below to enable the system to recognize W-LAN. Open or click the following: start, Control Panel, System, Hardware Device Manager, Network adaptors, TOSHIBA Wireless LAN Mini PCI Card and enable. Satellite Pro M10 Series...
1. Turn off the power to the computer and to all external devices connected to the computer. 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. Connecting the LAN cable Satellite Pro M10 Series 4-28...
Never spray cleaner directly onto the computer or let liquid run into any part of it. Never use harsh or caustic chemical products to clean the computer. Satellite Pro M10 Series 4-29...
CPU speed. Or, by lowering the CPU speed first, then if necessary, turning on the fan. Use the Cooling Method item of the Power Save Mode window in TOSHIBA Power Saver. Maximum Turn on the fan first, then if necessary, lower the Performance CPU processing speed.
The Keyboard Satellite Pro M10 Series Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with.
American keyboard driver. Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
Press Fn + F12 (ScrLock) to lock the cursor on a specific line. The power on default is off. Press Fn + Enter to simulate Enter on the enhanced keyboard’s numeric keypad. Press Fn + Ctrl to simulate the enhanced keyboard’s right Ctrl key. Satellite Pro M10 Series...
Hibernation: When you press Fn + F4, the computer enters Hibernation. To avoid entering Hibernation unexpectedly, a dialog box appears for verification. However, if you select the check box, it will not appear in the future. Satellite Pro M10 Series...
Page 110
The brightness level is always set at the maximum value for about 18 seconds, when the LCD turns on. After 18 seconds, the brightness level will appear at the Power Save Mode setting or you can change it manually. Display clarity increases with the brightness level. Satellite Pro M10 Series...
Emulating Fn key on external keyboard The Fn key is only on TOSHIBA keyboards. If you use an external keyboard attached to the computer, you can execute Fn key combinations by emulating the Fn key. (PS/2 keyboard only) See Chapter 7, HW Setup and Passwords, for details on setting the Fn key equivalent.
To turn on the Arrow mode, press Fn + F10. The Arrow mode F10 indicator lights. Now try cursor and page control using the keys shown in the figure below. Press Fn + F10 again to turn off the overlay. Satellite Pro M10 Series...
If the Numeric mode indicator lights, you can use the overlay for numeric entry. If the Arrow mode indicator lights, you can use the overlay for cursor and page control. 3. Release Fn to return to normal keyboard operation. Satellite Pro M10 Series...
3. Release Alt, and the ASCII character appears on the display screen. With the overlay off: 1. Hold down Alt + Fn. 2. Using the overlay keys, type the ASCII code. 3. Release Alt + Fn, and the ASCII character appears on the display screen. Satellite Pro M10 Series...
Power and Power-Up Modes Satellite Pro M10 Series Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Page 116
■ *3 For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places in TOSHIBA Power Saver: the Hibernate window and the Battery Alarm item of the Alarm window. If a main battery and a secondary battery are installed, the computer does not shut down until the charge in both batteries is exhausted.
Flashing orange Indicates a problem with the power supply. Plug the AC adaptor into another outlet. If it still does not operate properly, see your dealer. No light Under any other conditions, the indicator does not light. Satellite Pro M10 Series...
Press [F1] key to set Date/Time. The computer’s RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.
7. Never subject a battery pack to heat, such as storage near a heat source. Exposure to heat can cause the battery pack to ignite, explode or leak caustic liquid and cause death or serious injury. It could also fail or malfunction causing data loss. Satellite Pro M10 Series...
Page 121
2. Never dispose of battery packs with normal trash. Bring them to your TOSHIBA dealer or to another recycling centre to save resources and prevent environmental damage. Cover the terminals with electrical tape to prevent short-circuits, which could cause the battery pack to ignite or rupture.
Page 122
3. After the battery pack is charged, avoid leaving the AC adaptor connected and the computer turned off for more than a few hours at a time. Continuing to charge a fully charged battery pack can damage the battery. Satellite Pro M10 Series...
The computer enters Hibernate mode only if Hibernation is enabled in two places in TOSHIBA Power Saver: the Hibernate window and the Battery Alarm item of the Alarm window. You must recharge a battery pack when it becomes discharged.
Therefore, an often used, older battery will not operate for as long as a new battery even when both are fully charged. In this case, Power Save Modes window in TOSHIBA Power Saver will indicate a 100% charge for both the old and new battery, but the displayed estimated time remaining will be shorter for the older battery.
■ How you configure the computer (for example, whether you enable battery-power saving options). The computer provides a battery save mode, which can be set in TOSHIBA Power Saver, to conserve battery power. This mode has the following options: ■...
Overcharging makes the battery hot and shortens life. ■ If you are not going to use the computer for more than eight hours, disconnect the AC adaptor. ■ Store spare battery packs in a cool dry place out of direct sunlight. Satellite Pro M10 Series 6-12...
AC adaptor before the save is completed. Wait for the Disk indicator to go out. 1. Save your work. 2. Turn the computer’s power off. Make sure the Power indicator is off. 3. Remove all cables connected to the computer. Satellite Pro M10 Series 6-13...
Page 128
5. Slide the battery release latch to free the battery pack for removal, then lift up the battery pack. Releasing the battery cover For environmental reasons, do not throw away a spent battery pack. Please return spent battery packs to your TOSHIBA dealer. Satellite Pro M10 Series 6-14...
Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer’s power off. 2. Disconnect all cables connected to the computer. 3. Insert the battery pack. Securing the battery cover Satellite Pro M10 Series 6-15...
Refer also to the sections Turning on the power and Turning off the power in Chapter 3, Getting Started. Windows utilities You can specify the setting in TOSHIBA Power Saver. Hotkeys You can use hotkeys Fn + F3 to enter Standby mode and Fn + F4 to enter Hibernation.
Satellite Pro M10 Series Chapter 7 HW Setup and Passwords This chapter explains how to use TOSHIBA HW Setup program to configure your computer and how to set passwords. TOSHIBA HW Setup lets you configure settings for boot priority, keyboard, USB, LAN, device config, parallel/printer, display, CPU and general.
There are also three buttons: OK, Cancel and Apply. Accepts your changes and closes the HW Setup window. Cancel Closes the window without accepting your changes. Apply Accepts all your changes without closing the HW Setup window. Satellite Pro M10 Series...
The options in this tab are ECP and Standard Bi-directional. Sets the port type to Extended Capabilities Port (ECP). For most printers, the port should be set to ECP. (Default) Standard Bi- This setting should be used with some other directional parallel devices. Satellite Pro M10 Series...
The CPU always runs at its fastest speed. Always Low CPU power consumption and clock speed automatic switching function is disabled. The CPU always runs at low power consumption and low speed. Satellite Pro M10 Series...
1. Hold down F12 and boot the computer. 2. A menu will be displayed with the following icons: Built-in HDD, Slim Select Bay HDD, CD-ROM, FDD, Network (LAN), PCA (ATA) card boot. A bar will appear only under the selected device. Satellite Pro M10 Series...
Page 136
HW Setup. Support of PCA (ATA) card boot is guaranteed only for TOSHIBA PC card HDDs. A PCA (ATA) card takes the position of HDD in the Boot Priority Options list.
It is effective only for the internal keyboard and only when the computer is in standby mode. Enabled Enables Wake-up on Keyboard. Disabled Disables Wake-up on Keyboard. (Default) Satellite Pro M10 Series...
The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. Built-in LAN This feature enables or disables the Built-in LAN. Enabled Enables Built-in LAN functions. (Default) Disabled Disables Built-in LAN functions. Satellite Pro M10 Series...
HW Setup and Passwords TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Password Utility are different from the Windows password. User password To start the utility, point to or click the following items: ■...
If an unformatted card or one with an incompatible format is inserted, you will be prompted to format it with a tool named TOSHIBA SD Memory Card Format. To start the format tool, point to or click the following items: ■...
2. Enter the Password. 3. Press Enter. If you enter the password incorrectly three times in a row, the computer shuts off. In this case, you must turn the computer back on to retry password entry. Satellite Pro M10 Series 7-11...
Satellite Pro M10 Series Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory ■ PC cards ■...
The computer is equipped with a PC card expansion slot that can accommodate two 5 mm Type II cards or one 10.5 mm Type III card. Any PC card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC cards, including PC card 16’s multifunction card and CardBus PC cards.
PC card. 3. Press the PC card eject button to extend it. 4. Press the extended eject button to pop the card out slightly. 5. Grasp the PC card and remove it. Removing a PC card Satellite Pro M10 Series...
To insert an SD card, follow the steps below. 1. Insert the SD card. 2. Press gently to ensure a firm connection. Inserting an SD card Make sure the SD card is oriented properly before you insert it. Satellite Pro M10 Series...
Do not remove an SD card while the computer is in Standby or Hibernation mode. The computer could become unstable or data in the SD card could be lost. Satellite Pro M10 Series...
RAM. This section describes how to install and remove a memory module. Use only memory modules approved by TOSHIBA. Do not try to install or remove a memory module under the following conditions. You can damage the computer and the module. Also, data will be lost: ■...
9. Replace the battery pack as described in Chapter 6, Power and Power-Up Modes. 10. Turn the power on and make sure the added memory is recognized. Open System Properties in the Control Panel and click the General tab. Satellite Pro M10 Series...
Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. Removing the memory module 6. Seat the cover and secure it with two screws and replace the battery pack. Satellite Pro M10 Series...
Make sure you have the correct Bridge media adaptor case. Two cases come with the Bridge media adaptor: one marked A and one marked B. The case for the Satellite Pro M10 is marked with a B. The Bridge media adaptor case Installing To install the Bridge media adaptor in the case, follow the steps below.
2. Slide the latch in the direction of the arrow shown below. 3. Push the Bridge media adaptor up from the bottom and lift it out. Removing the Bridge media adaptor from the case Satellite Pro M10 Series 8-10...
CompactFlash Association specifications. Inserting a CompactFlash To insert a CompactFlash module, follow the steps below. 1. Insert the CompactFlash module into the slot. 2. Press gently to ensure a firm connection. Inserting a CompactFlash module Satellite Pro M10 Series 8-11...
Inserting a Memory Stick To insert a Memory Stick, follow the steps below. 1. Insert the Memory Stick into the slot. 2. Press gently to ensure a firm connection. Inserting a Memory Stick Satellite Pro M10 Series 8-12...
■ Do not reuse a write-protect seal that has been removed. A reused seal might peel off in the computer or device and cause a malfunction. Satellite Pro M10 Series 8-13...
Page 155
If Windows does not recognize a SmartMedia card, try removing the card and inserting it again. Be careful not to touch the connectors. You could expose the storage area to static electricity, which can destroy data. Inserting a SmartMedia card Satellite Pro M10 Series 8-14...
4. Do not touch the metal part of a memory card or expose it to liquids or let it get dirty. 5. After using memory card, return it to its case. For more details on using memory cards, see manuals accompanying the cards. Satellite Pro M10 Series 8-15...
1. Fit the side of the secondary battery pack opposite the connector into the adaptor. 2. Lay the battery into the adaptor. The latch should close automatically to secure the secondary battery pack. Installing the secondary battery pack in the adaptor Satellite Pro M10 Series 8-16...
Lithium-ion battery packs. USB FDD kit The 3 ½" external diskette drive module can be connected to the USB port. For details on connecting the 3 ½" external diskette drive module, refer to Chapter 4, Operating Basics. Satellite Pro M10 Series 8-17...
To install an HDD in the Slim Select Bay HDD adaptor follow the steps below. 1. Slide the lock to the unlock position and open the lid. Opening the lid 2. Insert the HDD and push forward to ensure a firm connection. Installing the HDD Satellite Pro M10 Series 8-18...
One RJ45 LAN jack ■ One RJ11 Modem jack ■ External monitor port ■ Parallel port ■ Serial port ■ PS/2 mouse port ■ PS/2 keyboard port ■ DC IN socket ■ Security lock slot Satellite Pro M10 Series 8-19...
Fn + F5 to switch to the internal display. Refer to Chapter 5, The Keyboard, for details on using hot keys to change the display setting. Satellite Pro M10 Series 8-20...
7. Turn on the computer. 8. Start the HW Setup program. Refer to Chapter 7, HW Setup and Passwords. 9. Select the Parallel/Printer tab from the TOSHIBA HW Setup window. 10. Set the Parallel Port Mode and press OK. 11. Choose Reboot for the change to take effect.
4. Click the nView Display Mode tab, click Device Settings and click Select Output Device. 5. Select Advanced and select TV in the Device Selection window. 6. Select the Format box and select the format that your TV supports. Satellite Pro M10 Series 8-22...
When you press the TV out Button, the CRT resolution is also set. (The default is 1024 x 768.) If you want to change the resolution, follow the steps below. 1. Open Display properties and select the Settings tab. 2. Select Advanced. Display properties Satellite Pro M10 Series 8-23...
Page 165
Optional Devices 3. Select the Adaptor tab, then select List All Modes..The Adaptor window 4. Select 640 by 480, High Colour (16 bit), 60 Hertz. Resolution menu Satellite Pro M10 Series 8-24...
There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. ■ Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise.
In Windows 2000, open the Unplug or Eject Hardware icon on the Task Bar. 2. Point to i.LINK (IEEE1394) device and click. 3. Disconnect the cable from the computer then from the i.LINK device. Refer also to the documentation that came with your i.LINK device. Satellite Pro M10 Series 8-26...
Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer. Security lock Satellite Pro M10 Series 8-27...
Satellite Pro M10 Series Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.
Do you hear any beeps? How many? Are they long or short? Are they high pitched or low? Is the computer making any unusual noises? Write down what you hear. Record your observations so you can describe them to your dealer. Satellite Pro M10 Series...
Sound system ■ ■ CD-R/RW drive TV output signal ■ ■ DVD-ROM drive Monitor ■ ■ CD-RW/DVD-ROM drive i.LINK ■ ■ DVD Multidrive Modem ■ ■ Diskette drive ■ ■ PC card Wireless LAN ■ Bluetooth Satellite Pro M10 Series...
This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system. Depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: ■...
Check the condition of the cord and terminals. If the cord is frayed or damaged, replace it. If the terminals are soiled, wipe them with cotton or a clean cloth. If the AC adaptor still does not power the computer, contact your dealer. Satellite Pro M10 Series...
Page 174
If you do not think the battery is at the end of its operating life, see your dealer. Battery doesn’t power Check the power consumption settings in the computer as long TOSHIBA Power Saver Utility. Consider using a as expected power saving mode. Satellite Pro M10 Series...
Y. The RTC battery is 6. Restart the computer. discharged Password For information on setting and using a password, refer to the TOSHIBA Password Utility section in Chapter 7, HW Setup and Passwords. Problem Procedure Cannot enter or forgot...
Refer to your OS documentation or online HELP for information on running SCANDISK and the defragmenter. As a last resort, reformat the hard disk. Then, reload the operating system and other files. If problems persist, contact your dealer. Satellite Pro M10 Series...
DVD does not play Some video discs might not play properly in a correctly in an optional Expansion Station. Play the disc in the Expansion Station DVD-ROM drive installed in the computer. If problems persist, contact your dealer. Satellite Pro M10 Series...
Mode 2 (Form1, Form2), CD-DA, CD-Text Check the region code on the DVD. It must match that on the DVD drive. Region codes are listed in the CD-RW/DVD-ROM drive section in Chapter 2, The Grand Tour. Satellite Pro M10 Series 9-10...
■ If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
Page 180
■ If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
Check the CD’s documentation. Check the type of CD you are using. The drive supports: Enhanced CD (CD-EXTRA), Photo CD, CD-R, CD-ROM, CD-Rewritable, CD-ROM XA Mode 2 (Form1, Form2), CD-DA, CD-Text Satellite Pro M10 Series 9-13...
■ If you have trouble writing, make sure you are Cannot write correctly observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
Problem Procedure Printer does not turn Check that the printer is connected to an electric outlet. Make sure the outlet is supplying power by plugging in an appliance. Satellite Pro M10 Series 9-15...
Then click the Detail Setting button and click the Device Select tab. Check that the Touch pad is not selected. Press Fn + F9 to enable the TOSHIBA Dual Pointing Device. On-screen pointer The system might be busy. If the pointer is...
2. Click the Pointer Options tab. 3. Set the speed as instructed and click OK. The mouse pointer The mouse might be dirty. Refer to your mouse moves erratically documentations for instructions on cleaning. If problems persist, contact your dealer. Satellite Pro M10 Series 9-17...
Make sure the headphone connection is secure. If problems persist, contact your dealer. Annoying sound is You may be experiencing feedback. Refer to heard Using the microphone section in Chapter 4, Operating Basics. If problems persist, contact your dealer. Satellite Pro M10 Series 9-18...
Display error occurs Check that the cable connecting the external monitor to the computer is attached firmly. If problems persist, contact your dealer. Satellite Pro M10 Series 9-19...
Check the flow control communication and communication protocol. You cannot receive an Check the rings before auto answer setting in incoming call your communications application. If problems persist, contact your dealer. Satellite Pro M10 Series 9-20...
Bluetooth device is turned on. Make sure no optical Bluetooth PC card is installed in the computer. The built-in Bluetooth function and an optional Bluetooth PC card cannot operate simultaneously. If problems persist, contact your dealer. Satellite Pro M10 Series 9-21...
They are your best sources for current information and support. Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to Toshiba at the nearest location listed in Appendix C. Satellite Pro M10 Series 9-22...
Specifications Satellite Pro M10 Series Appendix A Specifications This appendix summarises the computer’s technical specifications. Physical Dimensions Size 335 (w) x 293 (d) x 36/43 (h) millimetres (not including parts that extend beyond the main body) 2.9 kilograms, configured with: 14XGA, 512 MB,...
Conditions Altitude (from sea level) Operating -60 to 3,000 meters Nonoperating -60 to 10,000 meters maximum Power Requirements AC adaptor 100- 240 volts AC 50 or 60 hertz (cycles per second) Computer 15 VDC 4.0 amperes Satellite Pro M10 Series...
Page 193
Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialling Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications Communication Data: Full duplex system Fax: Half duplex Satellite Pro M10 Series...
Page 194
Transmitting level -10 dBm Receiving level -10 to -40 dBm Input/output 600 ohms ±30% impedance Error correcting MNP class 4 and ITU-T V.42 MNP class 5 and ITU-T V.42bis Data compression Power supply +3.3V (supplied by computer) Satellite Pro M10 Series...
AC Power Cord and Connectors Satellite Pro M10 Series Appendix B AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country in which it is used.
Page 196
The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia and Europe. USA and Canada United Kingdom UL approved BS approved CSA approved Australia Europe AS approved Approved by the appropriate agency Satellite Pro M10 Series...
TOSHIBA representation for registration. On the following pages is a list of the TOSHIBA companies who can be contacted if a claim on the warranty needs to be made. If users need further addresses in Eastern Europe or outside Europe, these are available from the national or European companies.
Page 198
ServiceNet EE Tel: +372-6504-949 Pärnu str. 142A Fax: +372-6504-916 11317 Tallinn http://www.gnt.ee Finland Scribona TPC OY / Toshiba Digital Media Tel: +358-9-5272555 Sinimäentie 14,P.O.Box 83, 02630 ESPOO Fax: +358-9-5272500 http://www.toshiba.se France Toshiba Systèmes (France) S.A. Tel: 08 92 69 70 92 7 Rue Ampère, 92804 Puteaux Cedex...
Page 199
C.B.I. Lotissement Attoufik, Tel: +212-2-243 71 71 Rue No 1 Immeuble 29, Sidi Maar 20190, Fax: +212-2-243 71 87 Casablanca Netherlands Toshiba Information Systems Benelux B.V. Tel: +31-0900-1000-1000 Rivium Boulevard 41 Fax: +31-10-2882-390 2909 LK Capelle a/d IJssel http://www.toshiba.nl Satellite Pro M10 Series...
Page 200
The TOSHIBA International Warranty Norway Scribona Norge A/S; Toshiba PC Service Tel: +47-22-897-189 Stålfjæra 20, P.O.Box 51, Kalbakken Fax: +47-22-897-166 0901 Oslo http://www.toshiba.se Oman Suhail&Saud Bahwan (SSB) Tel: +968-790 117 (Sultanate of Sarco Building, Ground Floor No. 459, Way Fax: +968-790 192 Oman) No.
Page 201
Toshiba Information Systems (UK) Ltd. Tel: +44-1932-828828 Kingdom Toshiba Court, Weybridge Business Park Fax: +44-1932-822958 Addlestone Road, Weybridge KT15 2UL http://www.toshiba.co.uk United States Toshiba America Information Systems, Inc. Tel: +1-949-583-3000 9740 Irvine Blvd., P.O. Box 19724 Fax: +1-949-583-3345 Irvine, CA 92713-9724 http://www.toshiba.com Yugoslavia CT Computers d.o.o.
Display Controller and Modes Satellite Pro M10 Series Appendix E Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off. The controller is an advanced Video Graphics Array (VGA) that provides...
Page 210
2 of 256K 2 of 256K Grph Pels 640 x 480 8 x 16 16 of 256K 16 of 256K Grph Pels 320 x 200 8 x 8 256 of 256K 256 of 256K Grph Pels Satellite Pro M10 Series...
Page 211
256/256K (Virtual) 256/256K 2048 x 1536 256/256K (Virtual) 256/256K 640 x 480 64K/64K 64K/64K 800 x 600 64K/64K 64K/64K 1024 x 768 64K/64K 64K/64K 1280 x 1024 64K/64K (Virtual) 64K/64K 1600 x 1200 64K/64K (Virtual) 64K/64K Satellite Pro M10 Series...
Page 212
16M/16M 16M/16M 800 x 600 16M/16M 16M/16M 1024 x 768 16M/16M 16M/16M 1280 x 1024 16M/16M (Virtual) 16M/16M 1600 x 1200 16M/16M (Virtual) 16M/16M 1920 x 1440 16M/16M (Virtual) 16M/16M 2048 x 1536 16M/16M (Virtual) 16M/16M Satellite Pro M10 Series...
Page 213
1600 x 1200 256/256K (Virtual) 256/256K 1920 x 1440 256/256K (Virtual) 256/256K 2048 x 1536 256/256K (Virtual) 256/256K 640 x 480 64K/64K 64K/64K 800 x 600 64K/64K 64K/64K 1024 x 768 64K/64K 64K/64K 1280 x 1024 64K/64K 64K/64K Satellite Pro M10 Series...
Page 214
800 x 600 16M/16M 16M/16M 1024 x 768 16M/16M 16M/16M 1280 x 1024 16M/16M 16M/16M 1400 x 1050 16M/16M 16M/16M 1600 x 1200 16M/16M (Virtual) 16M/16M 1920 x 1440 16M/16M(Virtual) 16M/16M 2048 x 1536 16M/16M (Virtual) 16M/16M Satellite Pro M10 Series...
Page 215
1920 x 1440 256/256K (Virtual) 256/256K 2048 x 1536 256/256K (Virtual) 256/256K 640 x 480 64K/64K 64K/64K 800 x 600 64K/64K 64K/64K 1024 x 768 64K/64K 64K/64K 1280 x 1024 64K/64K 64K/64K 1600 x 1200 64K/64K 64K/64K Satellite Pro M10 Series...
Page 216
640 x 480 16M/16M 16M/16M 800 x 600 16M/16M 16M/16M 1024 x 768 16M/16M 16M/16M 1280 x 1024 16M/16M 16M/16M 1600 x 1200 16M/16M 16M/16M 1920 x 1440 16M/16M (Virtual) 16M/16M 2048 x 1536 16M/16M (Virtual) 16M/16M Satellite Pro M10 Series...
What is your address, phone, and fax number? To register the theft, please follow these procedures: ■ Fill in the Toshiba Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.
ASCII Character Codes Satellite Pro M10 Series Appendix G ASCII Character Codes This appendix shows the American Standard Code for Information Interchange (ASCII) on the following pages. The characters in the IBM char column appear on your display when you type the corresponding ASCII code (as described in Chapter 5, The Keyboard).
Page 220
ASCII Character Codes Sort Ctrl code code char char ¶ § ▲ ▼ Satellite Pro M10 Series...
Page 221
ASCII Character Codes Sort Sort code code char code code char space “ & ’ < > Satellite Pro M10 Series...
Page 222
’ Ç ü é â ä à å ç ê ë è ï î ì Ä Å É æ Æ ô ö ò û ù ÿ Ö Ü ¢ £ ¥ Satellite Pro M10 Series...
Page 223
ASCII Character Codes Sort Sort code code char code code char á í ó ú ñ Ñ ¿ ¡ « » Satellite Pro M10 Series...
Page 224
ASCII Character Codes Sort code code char ß Satellite Pro M10 Series...
Internal Modem Guide Satellite Pro M10 Series Appendix H Internal Modem Guide This appendix describes how to install and the remove the internal modem. Do not disassemble the computer beyond the steps described in this instruction or touch any components not specifically described.
6. Remove the modem cover. 7. Remove two screws and remove the modem board. 8. Disconnect the modem cable. 9. Secure the modem cover with one screw. 10. Install the battery pack. 11. Refer to the installation procedures for details. Satellite Pro M10 Series...
Wireless LAN Satellite Pro M10 Series Appendix I Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card specifications Form Factor Mini PCI Type III Capability IEEE 802.11 Standard for Wireless LANS (DSSS)
The range of your wireless devices can be affected when the antennas are placed near metal surfaces and solid high-density materials. ■ Range is also affected by "obstacles" in the signal path of the radio signals that may either absorb or reflect the radio signal. Satellite Pro M10 Series...
Page 229
Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in your country/region. Wireless IEEE 802.11 Channels Sets (Revision B)
Page 230
Wireless IEEE 802.11 Channels Sets (Revision A) Channel ID Frequency Range: 5150- Note 5850 MHz 5180 5200 5220 5240 5260 5280 5300 5320 5745 US only * 5765 US only * 5785 US only * 5805 US only * Satellite Pro M10 Series...
Page 231
* Available Area: US (USA, CANADA) only A peer-to-peer mode is available under the following condition: A Wireless LAN card receives a “US county/region code” beacon of the standard IEEE 802.11 (Revision D) from a Wireless LAN Access Point. Satellite Pro M10 Series...
Glossary The terms in this glossary cover the topics discussed in this manual. Alternate naming is included for reference. AccuPoint II: A pointing device integrated into the TOSHIBA computer keyboard. adaptor: A device that provides an interface between two dissimilar electronic devices.
Page 233
An interface for transmission of signals, data or electric power. byte: The representation of a single character. A sequence of eight bits treated as a single unit; also the smallest addressable unit within the system. Satellite Pro M10 Series...
Page 234
Instructions you enter at the terminal keyboard that direct the actions of the computer or its peripheral devices. communications: The means by which a computer transmits and receives data to and from another computer or device. See parallel interface; serial interface. Satellite Pro M10 Series...
Page 235
CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen. Satellite Pro M10 Series...
Page 236
DOS: Disk operating system. See operating system. driver: A software program, generally part of the operating system, that controls a specific piece of hardware (frequently a peripheral device such as a printer or mouse). Satellite Pro M10 Series...
Page 237
An icon in Windows used to store documents or other folders. function keys: The keys labelled F1 through F12 that tell the computer to perform certain functions. Satellite Pro M10 Series...
Page 238
The computer’s feature in which certain keys in combination with the extended function key, Fn, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. Satellite Pro M10 Series...
Page 239
For each key, the transmitted code is, in turn, representative of the (ASCII) character marked on the key. kilobyte (KB): A unit of data storage equal to 1024 bytes. See also byte and megabit. Satellite Pro M10 Series...
Page 240
(modulates) digital data for transmission over telephone lines and then converts modulated data (demodulates) to digital format where received. monitor: A device that uses rows and columns of pixels to display alphanumeric characters or graphic images. See CRT. Satellite Pro M10 Series...
Page 241
The results of a computer operation. Output commonly indicates data 1) printed on paper, 2) displayed at a terminal, 3) sent through the serial port of internal modem, or 4) stored on some magnetic media. Satellite Pro M10 Series...
Page 242
A set of instructions a computer can execute that enables it to achieve a desired result. See also application. prompt: A message the computer provides indicating it is ready for or requires information or an action from you. Satellite Pro M10 Series...
Page 243
A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B computing device regulations. Random Access Memory (RAM): High speed memory within the computer circuitry that can be read or written to.
Page 244
A disk that has been formatted with an operating system. For MS-DOS the operating system is contained in two hidden files and the COMMAND.COM file. You can boot a computer using a system disk. Also called an operating system disk. Satellite Pro M10 Series...
Page 245
LAN systems based on Direct Sequence Spread Spectrum radio technology that complies with the IEEE 802.11 Standard (Revision B) . write protection: A method for protecting a diskette (floppy disk) from accidental erasure. Satellite Pro M10 Series...
Index Satellite Pro M10 Series Index AC adaptor, 1-3, 2-22, 8-17 CD-R/RW drive, 2-19 additional, 1-13 Problems, 9-13 Connecting, 3-5 CD-RW/DVD-ROM drive, 2-16 DC IN 15V port, 2-4 Problems, 9-10 AccuPoint, 2-9 Certification agencies, B-1 control buttons, 2-9 Communications, 1-7...
Page 248
Processor, 1-3 indicators, 6-3 Problems, 9-4 Requirements, A-2 Restarting the computer, 3-11 restarting the computer, 3-11 Restoring the Windows system, System indicators, 2-10 3-12 Turning off, 3-7 Turning on, 3-7 Power save mode, 5-4 Printer Problems, 9-15 Satellite Pro M10 Series...