Usb; Memory Expansion; Sound System - Toshiba Satellite Pro M10 User Manual
Hide thumbs
Also See for Satellite Pro M10:
- Maintenance manual (460 pages) ,
- User manual (273 pages) ,
- Replacement manual (24 pages)
Table of Contents
Advertisement
USB
Refer also to your USB device's documentation.
Problem
USB device does not
work
Memory expansion
Refer also to Chapter 8, Optional Devices, for information on installing
memory modules.
Problem
Beep sounds. (If slot A
two beeps, If slot B
three beeps, If both
two and three beeps)
Sound system
Refer also to documentation for your audio devices.
Problem
No sound is heard
Annoying sound is
heard
Satellite Pro M10 Series
Procedure
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows documentation
for information on checking the drivers.
If problems persist, contact your dealer.
Procedure
Make sure the memory module installed in the
expansion slot is compatible with the computer.
If an incompatible module has been installed,
follow the steps below.
1. Disconnect the AC adaptor and all peripheral
devices.
2. Remove the battery pack.
3. Remove the memory module.
4. Replace the battery pack and/or connect the
AC adaptor.
5. Turn on the power.
If problems persist, contact your dealer.
Procedure
Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure.
If problems persist, contact your dealer.
You may be experiencing feedback. Refer to
Using the microphone section in Chapter 4,
Operating Basics.
If problems persist, contact your dealer.
Troubleshooting
9-18
Advertisement
Table of Contents
