Grounded Tools: Tools With Three Prong Plugs - Harbor Freight Tools 95094 Operating Instructions Manual

Harbor freight tools assembaly and operating instruction drill driver kit 95094

Table of Contents

these chemicals are: lead from lead-based paints, crystalline silica from bricks and

cement or other masonry products, arsenic and chromium from chemically treated

lumber. Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as those dust masks that are

specially designed to filter out microscopic particles. (California Health & Safety

Code § 25249.5, et seq.)

13.

WARNING! People with pacemakers should consult their physician(s) before

using this product. Operation of electrical equipment in close proximity to a heart

pacemaker could cause interference or failure of the pacemaker.

Improperly connecting the grounding wire can result in the risk of electric shock.

Check with a qualified electrician if you are in doubt as to whether the outlet is

properly grounded. Do not modify the power cord plug provided with the tool.

Never remove the grounding prong from the plug. Do not use the tool if the

power cord or plug is damaged. If damaged, have it repaired by a service facil-

ity before use. If the plug will not fit the outlet, have a proper outlet installed by

a qualified electrician.

GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS

Tools marked with "Grounding Required" have a three wire cord and three prong

grounding plug. The plug must be connected to a properly grounded outlet. If

the tool should electrically malfunction or break down, grounding provides a low

resistance path to carry electricity away from the user, reducing the risk of electric

shock. (See figure A.)

The grounding prong in the plug is connected through the green wire inside the

cord to the grounding system in the tool. The green wire in the cord must be the

only wire connected to the tool's grounding system and must never be attached to

an electrically "live" terminal. (See figure A.)

for technical questions, please call 1-800-444-3353.

SKU 95094

GROUNDING

WARNING!

PAGE 6

Table of Contents

Show Quick Links

Table of Contents