Table of Contents
Advertisement
3.
For the first time, enter the following default URL in the Web browser of the personal computer to display the Web server
window.
Coupler
NZ2FT-GN
NZ2FT-BT
NZ2FT-PN
NZ2FT-PBV
NZ2FT-MT
NZ2FT-EIP
When the parameter "IP address USB port" of the coupler has been changed from the default URL, after resetting the coupler,
specify the changed IP address after "http://".
If the Web server window is not displayed, the following settings are required on the personal computer.
• Installation of the USB driver ( Page 61 Installation procedure of the USB driver)
• Proxy exception setting when using a proxy server ( Page 62 Proxy exception setting)
Installation procedure of the USB driver
The following describes the installation procedure of the USB driver. (The following example is provided for Windows 10. The
windows and menu names may differ depending on the OS version.)
Default URL
http://192.168.1.202
http://192.168.1.202
http://192.168.1.202
http://192.168.1.202
http://192.168.1.202
http://192.168.5.202
Setting range of the parameter of the coupler "IP address
USB port"
• 192.168.1.202
• 192.168.2.202
• 192.168.3.202
• 192.168.4.202
• 192.168.5.202
1.
Turn on the coupler and connect to a personal computer
using a USB cable. Pay attention to the orientation of
the USB port and USB connector when connecting a
USB cable.
2.
From the personal computer, select [Control Panel]
[Device Manager].
3.
Select and right-click "Remote NDIS Compatible
Device" in "Network Adapter" on the Device Manager
view. Select "Update driver" from the popup window.
4.
Select "Browse my computer for driver software".
4.1 Connection with a Personal Computer
4
4 WEB SERVER
61
- Quick Links:
- Analog Input Module
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
