Table of Contents
Advertisement
Change of "User name" and "Password"
"User name" and "Password" can be changed.
■Operating procedure
1.
Display the coupler in "Component view", and click the [Change login] button.
2.
Enter "User name" and "Password" of "Current login", and enter "New user name", "New password", and "Repeat new
password" of "New login".
The following table shows the input conditions and supported characters.
Item
Condition
New user name
1 character or more, 30 characters maximum
New password
• 8 characters or more, 30 characters maximum
• New Password and Repeat new password are the same.
• It is different from User name.
• Characters from at least three of the following types: lower-case
characters, upper-case characters, numbers, and special characters
3.
Click the [Change login] button.
When the password is forgotten, refer to the following and set the password again.
Page 90 Cannot log in to the Web server
4 WEB SERVER
66
4.1 Connection with a Personal Computer
Supported character
• No restriction
• One-byte and two-byte characters can be mixed.
• Alphanumeric characters, symbols, and spaces are
available.
• Only one-byte characters
• Alphanumeric characters, symbols, and spaces are
available.
- Quick Links:
- Analog Input Module
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
