Time Interval (T2) Between Ij Printer Response And Printing Start - Hitachi UX2 User Manual
Hide thumbs
Also See for UX2:
- Instruction manual (300 pages) ,
- Technical manual (184 pages) ,
- Basic operation manual (70 pages)
Table of Contents
Advertisement
1.5.2-2 Time interval (T2) between IJ printer response and printing start
(1) When Print format is set to "Individual"
No.
Transmission type
1 Print description
2 Print data recall
3 Print data registration
4
5
Print conditions
6
7
Free layout
8 User pattern character
9 Date/time setup
●The IJ printer executes an internal process to make printing preparations in accordance with the received
print data. Do not enter the print start signal during internal process execution.
●In the overwrite-protected mode, initiate the next communication after completion of printing.
●In the overwrite-enabled mode, it is possible that next communication is sent in printing, but the fault
"Print data changeover in progress S" occurs.
●When a print start signal is input with shorter timing than T2, the fault "Print data changeover in progress M"
occurs.
●The more different items of the print format, the longer the time until ready to print.
●When the Print format is set to "Individual" and Free layout transmission is made, a communication error
will occur.
*7 If the communication time interval is not sufficiently secured, it may not operate normally.
*8 When there is a data matrix, QR code, Micro QR and GS1 DataBar, and Dotcode setting, the time is
as follows:
*9 When there is a QR code setting, T2 Minimum time is 400xN (ms)(N: Number of QR codes).
*10 When there is a QR code and GSI DataBar setting, the time is as follows:
Time interval (T2) between IJ printer response and printing start
Conditions
The print message transfer
ACK condition is t=fixed.
The print message transfer
ACK condition is t=async.
When the character height, character
width, character orientation, ink drop
use percentage, or print format
changes before or after recall.
When the character height, character
width, character orientation, ink drop
use percentage, or print format does
not change before or after recall.
－
Print specifications
Print format
Line count/print format uniformity
Format setup change
－
－
－
T2 Minimum Time（ms)
Within 24 items
Ｍ
+ ３５
１０
０
400
60
－
400
400
200
200
－
－
Ｎ
+ ３５
１０
M: Number of communication characters
N: Number of printing characters
55
Remarks
25 items or more
Ｍ
+ ５０
*8
１０
０
400
*9
80
*10
－
400
*9
400
*9
200
*10
200
－
－
Ｎ
+ ５０
１０
Advertisement
Table of Contents
