Description Of Functions - Hitachi UX2 User Manual
Hide thumbs
Also See for UX2:
- Instruction manual (300 pages) ,
- Technical manual (184 pages) ,
- Basic operation manual (70 pages)
Table of Contents
Advertisement
1.6.2 Description of Functions
(1) Application procedure
● Prepare the following in advance:
No.
Specify "overwrite-enabled" for communication mode on the communication
environment screen. In addition, specify "t=fixed" for print message transfer
1
ACK.
Set the buffer function on the second page of the communication environment
2
setting screen to "enable."
Confirm the setting values for "Buffer repeat count", "Empty Buffer Fault",
3
"Timing of Fault" and "Data number at Fault" on the second page of the
communication environment setting screen.
Setting items of communication environment setting screen
Setting items
Buffer function
Buffer repeat count
Empty Buffer Fault
Timing of Fault
Data number at Fault
● The function (application) will be valid only when the printer is online and in the ready status.
Offline will set to standard-mode printing.
● The following shows the application procedure :
No.
Switch to online.
1
2
Set to the ready status.
Transmit print contents accordingly so that print contents sent at least N times remain
in the buffer.
3
(N: Data number at Fault)
4
Print.
5
Subsequently repeat steps 3 and 4 above.
Preliminary Preparation Items
Procedure
Selects enable/disable for buffer function.
Sets how many times printing is to be executed before
switching the printing contents.
Selects whether or not communication buffer errors are to
be generated. The conditions for occurrence are set by
"Timing of Fault" and "Data number at Fault".
Selects timing by which communication buffer errors are to
be generated.
Sets the number of print data items by which a
communication buffer error is to be generated.
Application Procedure
Procedure
Procedure No.1 and 2 can be in random order
59
Description
Initial values
Disable
1
Enable
Print Complete
2
Advertisement
Table of Contents
