Table of Contents
Advertisement
Quick Links
ASSEMBLY APP AVAILABLE ON
We highly recommend downloading the Absco Sheds
Assembly App to assist with your build.
STEP BY STEP ASSEMBLY VIDEOS • PARTS CHECKLISTS • FAQ • 7 DAY
CUSTOMER SERVICE • WARRANTY INFORMATION • COUNCIL FORMS
4"
34.6"
When laying a concrete slab for your shed, it is
best practise to have a rebated edge to prevent
water ingress.
Rebated section is 1" high and inset 3" on all sides
from the overall slab base dimensions
AU: 1800 029 701
AU: 1800 029 701
+1 (866) 788 3046
+1 (866) 788 3046
+1 (866) 788 3046
+1 (866) 788 3046
N Z: 0800 466 444
N Z: 0800 466 444
Absco Industries
SPACE SAVER SHED
MODEL: 30082SK-PTX
10' W x 2'7" D x 5'11" H, 6'5" H
admin@absco.com.au
admin@absco.com.au
admin@absco.com.au
admin@absco.com.au
www.abscogardensheds.com
www.abscosheds.com.au
www.abscosheds.com.au
www.abscogardensheds.com
Assembly Instruction Manual
Scan to
download
122"
WALLS SIT
ON THIS LEVEL
RAISED FLOOR
INSIDE SHED
4"
3"
1"
PLEASE LEAVE A REVIEW
PLEASE LEAVE A REVIEW
www.abscosheds.com.au/review
www.abscosheds.com.au/review
Model: 30082SK-PTX
Australian Made
+
Overall slab base
dimensions for this
model are as shown
3"
Illustration not to
12/7/23
1.1
above.
scale.
1
Advertisement
Table of Contents
Related Manuals for ABSCO SHEDS 30082SK-PTX
Summary of Contents for ABSCO SHEDS 30082SK-PTX
- Page 1 MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made ASSEMBLY APP AVAILABLE ON We highly recommend downloading the Absco Sheds Scan to download Assembly App to assist with your build. STEP BY STEP ASSEMBLY VIDEOS • PARTS CHECKLISTS • FAQ • 7 DAY CUSTOMER SERVICE •...
-
Page 2: General Instructions
SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made GENERAL INSTRUCTIONS SAFETY NOTES • Before commencing any assembly, read • Some parts may have sharp edges. It is through these instructions in detail to gain... - Page 3 SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made COMPONENT PACKING LIST Nominal sheet widths are shown Check off all components. +/- 0.08” is within tolerance DESCRIPTION PART # DESCRIPTION PART #...
- Page 4 SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made DESCRIPTION PART # DESCRIPTION PART # CHANNEL CHANNEL 55AL 55AR 58.9” 58.9” CHANNEL CHANNEL 55CL 55CR 58.9” 58.9” CHANNEL CHANNEL 55BL 55BR 58.9”...
- Page 5 SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners.
- Page 6 SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made Guide on Joining Spliced Channels The text marked on all parts must be shown on the same side as each other JOIN>> JOIN>>...
- Page 7 SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made PRE-ASSEMBLY OF SPLICED CHANNELS Join together 12 x channel sections using 6 x channel joiners (Part CSJ) NOTE: Some channels may have holes in them - You will need to redrill holes where CSJ joining channel covers them.
-
Page 8: Component Overview
SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made COMPONENT OVERVIEW Absco Industries Assembly Instruction Manual Model: 30082SK-PTX 12/7/23... -
Page 9: Rear Panel Assembly
SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made REAR PANEL 1. Overlap specified sheets as ASSEMBLY shown. Make sure ends are flush. Where possible, have sheets orientated so printed part numbers are as shown. -
Page 10: Side Panel Assembly
SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made SIDE PANEL ASSEMBLY 2x required. Absco Industries Assembly Instruction Manual Model: 30082SK-PTX 12/7/23... - Page 11 SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made ROOF PANEL ASSEMBLY Absco Industries Assembly Instruction Manual Model: 30082SK-PTX 12/7/23...
- Page 12 SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made DOUBLE DOOR ASSEMBLY Vertical door channels are installed in the opposite orientation compared to the horizontal door channels. Long Short fl ange fl ange of...
-
Page 13: Front Panel Assembly
SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made FRONT PANEL ASSEMBLY Absco Industries Assembly Instruction Manual Model: 30082SK-PTX 12/7/23... - Page 14 SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made FRONT PANEL ASSEMBLY (continued) NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for proper alignment.
- Page 15 SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made PANEL CONSTRUCTION NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel are pre-punched for attaching roof sheeting.
- Page 16 SPACE SAVER SHED MODEL: 30082SK-PTX 10’ W x 2’7” D x 5’11” H, 6’5” H Australian Made FINAL CONSTRUCTION ANCHORING OF SHED LOCATION OF 8 CONCRETE ANCHORS Bolt & Nut Wall Sheet Steel Angle • EACH ANCHOR CONSISTS OF ONE NUT & BOLT, A DYNABOLT AND STEEL ANGLE.
- Page 17 Absco Sheds Storage Guidelines • Absco Sheds are designed to be weatherproof for normal weather conditions. In the event of extreme weather conditions such as heavy rain, combined with high wind gusts, the ridge capping, sheeting joins, screw fi xings etc., may exhibit minor deformations which may allow some water entry. These areas should be checked regularly to ensure that maximum strength and protection is maintained.
- Page 18 THE CUSTOMER SERVICE MANAGER, ABSCO SHEDS, PO BOX 119 ACACIA RIDGE QLD AUSTRALIA 4110 PHONE: +61 1800 029701 EMAIL: warranty@absco.com.au...