Table of Contents
Advertisement
30
www.electrolux.com
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent
dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
12.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme. The
first programme on the top right of
the programme dial is Eco 40-60, the
programme to which the information
of the energy label relates.
The indicator of Mode - Lavage button
illuminates.
The indicator of the Départ/Pause
button flashes.
The display shows an indicative
programme duration.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators will light up and the
given information will change on the
display accordingly.
If a selection is not possible
an acoustic signal sounds
and the display shows
12.6 Starting a programme
Touch the Départ/Pause
start the programme. It is not possible to
start the programme when the indicator
of the button is off and doesn't flash (e.g.
the door is open).
.
button to
The related indicator stops flashing and
stays on.
The programme starts, the door is
locked. The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
12.7 Starting a programme with
the delay start
1. Touch the Départ différé button
repeatedly until the display shows the
desired delay time.
2. Touch the Départ/Pause
The appliance door locks and starts
the countdown of the delay start. The
display shows the indicator
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start
after the countdown has
started
To cancel the delay start:
1. Touch the Départ/Pause
to pause the appliance. The related
indicator flashes.
2. Touch the Départ différé button
repeatedly until the display shows .
3. Touch the Départ/Pause
again to start the programme
immediately.
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Départ/Pause
to pause the appliance. The related
indicator flashes.
2. Touch the Départ différé button
repeatedly until the display shows the
desired delay time.
3. Touch the Départ/Pause
again to start the new countdown.
button.
.
button
button
button
button
Advertisement
Table of Contents
