Table of Contents
Advertisement
32
www.electrolux.com
1. Rotate the selector knob to the "Reset"
position
2. Wait for 1 second. The display shows
.
Now, you can set a new washing
programme.
12.11 Opening the door -
Adding garments
If the temperature and level
of the water in the drum are
too high and/or the drum is
still rotating you should not
open the door.
While a programme or the delay start
operates, the appliance door is locked.
The display shows the indicator
1. Touch the Départ/Pause
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
Close the door and touch the Départ/
Pause
The programme or the delay start
continues.
12.12 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active). The display shows
The indicator of the Départ/Pause
button goes off.
The door unlocks and the indicator
goes off.
1. Press button Marche/Arrêt to
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
shows the end of the
previous programme. Turn
the programme dial to set a
new cycle.
.
button.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
12.13 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
• The time area shows
display shows the door locked
• The indicator of the Départ/Pause
button starts flashing.
.
• The drum still turns at regular
intervals to prevent creases in the
button.
laundry.
• The door stays locked.
• You must drain the water to open the
door:
1. If necessary, touch the Essorage
button to decrease the spin speed
proposed by the appliance.
2. Press the Départ/Pause
the appliance drains the water and
spins.
The option indicator Rinse Hold
disappears.
3. When the programme is completed
and the door locked indicator
goes off, you can open the door.
4. Press the Marche/Arrêt button for a
few seconds to deactivate the
appliance.
12.14 Stand-by function
The Stand-by function automatically
deactivates the appliance to reduce the
energy consumption when:
• You do not use the appliance for 5
minutes when no programme is
running.
Press the button Marche/Arrêt to
activate the appliance again.
If you have selected No Spin
, the appliance will
only drain the water.
and the
.
button:
Advertisement
Table of Contents
