Table of Contents
Advertisement
PPDF17000 – Camera PPDF17520
4.2.
First check the signal strength at your location. Hold the camera (with the antenna screwed on) as
precisely as possible at the desired location: Does the monitor show a smooth live image at the desired
location? If this is the case, you can continue with the installation. Otherwise, reposition the camera or
monitor until a smooth live image is achieved.
Option 1: Flush-mounted power supply
1.
To start installation, use the drill template or unscrew the bracket to mark the required 3 drill
holes with the wall plate at the desired location for the camera. Drill the 3 holes and insert the
enclosed dowels.
2.
Connect the power cable to the camera connection and feed the cables into the wall.
3.
Fix the wall plate of the bracket in place with the screws provided.
4.
Insert the ball joint and fit the cover. The fixing ring is then screwed on a little.
5.
Now align the camera to the roughly desired coverage area and tighten the fixing ring.
English
Advertisement
Table of Contents
