Siemens SIMATIC S7-1200 System Manual page 545

Hide thumbs Also See for SIMATIC S7-1200:

Table of Contents

● With HWTYPE = 5 (submodule):

– All parameters of GEOADDR are evaluated.

– The hardware identifier of the submodule is output.

The AREA parameter of the GEOADDR system data type is not evaluated.

Table 9- 226 Data types for the parameters

Parameter and type

For further information on valid data types, refer to "Overview of the valid data types" in the

STEP 7 online help.

Table 9- 227 Condition codes

No error occurred.

Invalid value for in GEOADDR for HWTYPE.

Invalid value for in GEOADDR for IOSYSTEM.

Invalid value for in GEOADDR for STATION.

Invalid value for in GEOADDR for SLOT.

Invalid value for in GEOADDR for SUBSLOT.

* The error codes can be displayed as integer or hexadecimal values in the program editor.

S7-1200 Programmable controller

System Manual, V4.2, 09/2016, A5E02486680-AK

Pointer to the structure of the GEOADDR system data type. The

GEOADDR system data type contains the slot information from which the

hardware ID is determined.

Refer to the "GEOADDR system data type (Page 551)" for further infor-

Output of error information.

Hardware identifier of the assembly or the module.

The number is automatically assigned and is stored in the properties in

the hardware configuration.

Extended instructions

9.11 Address handling