Page 2
Table of contents Table of contents Explanation of symbols and safety instructions 1 Explanation of symbols and safety instructions ..2 Explanation of symbols 1.1 Explanation of symbols ..... . .2 1.2 General safety instructions .
Page 3
▶ Press to open a menu or menu item, CR 11 (H) sends the room temperature, the room temperature to confirm a setting value (e.g. change and the dew point (only with CR 11 H) to the UI/ temperature) or a message. controller as a control variable.
Page 4
Set the set room temperature Set the set room temperature If the CR 11 (H) control unit is assigned to a heat source, the set room temperature can be set on the CR 11 (H): ▶ Turn the selector until the desired set room temperature is shown in the display.
Page 5
Cooling mode Cooling mode Enable electric booster heater Prerequisite: • CR 11 (H) is assigned to a hot air generator as an individual controller in a room with an electric reheater. Some heating circuits on heat pumps can also be used for cooling.
Page 6
Fault displays Fault displays In the event of faults in the system, a fault is shown in the display of the CR 11 (H) and on the user interface of the heat source. Other fault displays depend on the heat source in the system. ▶...
Page 7
Declaration of Conformity Environmental protection is a fundamental corporate strategy The design and operating characteristics of this product of the Bosch Group. comply with the British, European and supplementary national The quality of our products, their economy and environmental requirements.
Page 8
Regulations 2008 Officer, Information Security and Privacy (C/ISP), Robert Ecodesign Directive 2009/ The Ecodesign for Energy- Bosch GmbH, Postfach 30 02 20, 70442 Stuttgart, GERMANY. 125/EC Related Products Regulations You have the right to object, on grounds relating to your...