Connector Check And Replacement Check - Toshiba Satellite Pro M10 Series Maintenance Manual
Portable personal computer
Hide thumbs
Also See for Satellite Pro M10 Series:
- User manual (249 pages) ,
- Replacement manual (24 pages) ,
- Brochure & specs (10 pages)
Table of Contents
Advertisement
2 Troubleshooting Procedures
Procedure 2
Connector Check and Replacement Check
If the LAN port malfunctions, there may be a bad connection between the RJ-45/RJ-11 jacks and
the System Board. Or the System Board may be damaged.
Disassemble the computer following the steps described in Chapter 4, Replacement Procedures
and perform the following checks:
Check 1
Make sure the RJ-45/RJ-11 jacks are firmly connected to system board PJ124.
If a connector is disconnected, connect it firmly and repeat Procedure 1. If the LAN
port is still not functioning properly, perform Check 2.
Check 2
The RJ-45/RJ-11 jacks may be defective or damaged. Replace it with a new one
following the steps in Chapter 4, Replacement Procedures. If the LAN port is still not
functioning properly, perform Check 3.
Check 3
The system board may be defective or damaged. Replace the system board with a
new one following the steps in Chapter 4, Replacement Procedures.
2-48
System board
JP124
Satellite Pro M10 Series Maintenance Manual (960-431)
2.11 LAN Troubleshooting
RJ-45/
RJ-11
Jacks
- Quick Links:
- Hardware Overview
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
