Assembly Steps - Hamilton Beach OG01 Assembly & Operation Manual

Hide thumbs Also See for OG01:

Table of Contents

Available languages

ASSEMBLY STEPS

STEP 1" Bottom

Shelf

1. Turn bottom shelf upside down. Attach the two (2) standard casters to right side of bottom

shelf with eight (8) M6 x 13 screws as shown in Fig. 1.

2. Screw one foot into the bottom shelf by hand, using the positioning

gage to determine

the

proper depth as shown in Fig. 1. Once the foot is screwed

in to the proper depth, hold it in

place while tightening

the nut to the bottom shelf with the provided

wrench, as also shown in

Fig. 1. This will secure the foot in place.

3. Repeat Step 2 with the other foot.

Positioning Gage (Packed with feet)

Wrench

Fig. 1

Table of Contents

Chapters

Table of Contents