Rear Pull; Push-Pull; Manual Sheet Feed - IBM 3 User Manual
4247 printer
Hide thumbs
Also See for 3:
- Installation and reference manual (72 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
v Ejects forms for viewing
Rear Pull
This key is invalid when the printer is in an end-of-forms condition. The last form
is automatically ejected from the printer when an end-of-forms condition is
encountered.
There is no automatic loading for the Rear Pull paper path. When the printer
displays:
Press Stop and manually align the forms on the rear tractor.
Press Load/Eject. Use the Micro or Micro to position the forms.
Push-Pull
The Push-Pull paper path uses both the front and rear tractors
v Loading the front tractors
v Loading the rear tractors
v Press Form Feed to advance the forms to the top of the next form.
Manual Sheet Feed
If Automatic Manual Load is set to Disabled in the Printer Setup category, the
printer displays:
48
4247 Model 003 User's Guide
093 EJECT PENDING
and beep the alarm. When the end of the form is reached, the printer becomes
not ready, displays:
003 FORMS EJECTED
PRESS LOAD
and advances the form so that you can tear off the form at the perforation and
remove it from the printer.
Pressing the key a second time moves the next form to be printed back to the
previous print position and makes the printer ready.
Refer to "Continuous Forms Eject Mode" on page 152 for more information on
changing Continuous Forms Eject mode.
If a Form Feed is not done prior to pressing Load/Eject, the forms will be
positioned for you to view them to examine the printing
001 END OF FORMS
LOAD FORMS
After the forms are loaded under the sensor and onto the tractors at the bottom
of the forms device, press Load/Eject to automatically load the forms to the top
of form position.
Manually align the forms on the rear tractor. Use the Micro or Micro to
position the forms.
004 PRESS LOAD
- Quick Links:
- Lan Attachment
Hide quick links:
Advertisement
Chapters
Table of Contents
