Fan/Heat Sink/Cpu - Toshiba PORTÉGÉ M700 Maintenance Manual

Hide thumbs Also See for PORTÉGÉ M700:

Table of Contents

4 Replacement Procedures

4.20 Fan/Heat sink/CPU

Removing the Fan/Heat sink/CPU

The following describes the procedure for removing the fan/heat sink/CPU. (See Figure 4-32

1. Remove the following screws, metal plate and CPU hold plate.

2. Disconnect the fan cable from the connector CN8771 on the system board.

3. Remove the following screws and heat sink.

4. Remove the fan hood.

5. Peel off the cooling sheet.

CAUTION: Do not reuse the removed cooling sheet.

[CONFIDENTIAL]

PORTÉGÉ M700 Maintenance Manual (960-661)

4.20 Fan/Heat sink/CPU

Table of Contents