Page 1
Operator′s manual Leaf Blower Please read the operator’s manual carefully and make sure you English understand the instructions before using the machine.
1.2 Proper use The leaf blower is intended for use with a Husqvarna P 520D or P 525D device. • The machine is designed for clearing leaves. It can be used for standard applications and •...
Page 7
ENGLISH There are crushing and shearing points on driven parts. • Attached or towed equipment and loads can affect handling, steering, braking and stability. • Work at a speed appropriate to the relevant conditions. Unauthorized modifications jeopardize the operating safety of the machine and are prohibited. •...
Page 8
ENGLISH 1.3.4 During operation If unusual noises or vibrations occur while operating the leaf blower, stop the motor • immediately and consult a specialist. Checks must be carried out on the fan propeller; otherwise, serious accidents may occur. If persons or vehicles approach the danger area (25-m radius), the attachment must be •...
ENGLISH 1.4 Pictograms used The following pictograms are located on the unit to inform the operator that care and attention is required when using and maintaining the unit. Explanation of pictograms used: Read and observe the operating manual and the safety instructions before starting up.
ENGLISH Description 2.1 General Description of the Leaf Blower The leaf blower consists of a steel construction with a plastic turbine housing (1:A). In the turbine housing, the air sucked in at the front is accelerated and blown out again through the vertically positioned rotatable air scoop (1:B).
ENGLISH Detaching • For more information, please refer to the operating manual for the carrier vehicle. When uncoupling there is a risk of injury, e.g. due to crushing. Particular caution must be • exercised. The procedure for uncoupling the attachment is as follows: •...
ENGLISH Maintenance 6.1 General The attachment must be maintained regularly. • Failure to comply with this requirement can result in injuries or damage to the machine. Before • each use, check all parts relevant to safety. The safety instructions set out in 1.3.5 must be followed. •...
Technical data Technical data Drive Mechanical 90.1 dB(A) at operator ear Sound level L pA,eq Measurement based on DIN EN 12733:2009 Max. power take-off speed 2,500 rpm Flow rate 4300 m³/h Discharge air range Approx. 12 m Weight Approx. 85 kg Length / Width / Height Approx.
Page 14
EG - Konformitätserklärung CE Déclaration de conformité EC Declaration Conformity EG conformiteitsverklaring W Wir Nous Kersten Arealmaschinen GmbH Empeler Straße 95 D- 46459 Rees erklären, dass das déclarons que le herewith declare verklaren dat het Produkt produit that the product produkt Anbau –...
Page 16
Original instructions Order number: B00063 From machine no.: 55010 Revision: R00 As of: 01.2015 2015-02-19...