Monitoring samples loaded on the optional universal rack handler
1. At the universal rack handler Operation Panel window, select
then select
Perform any of the following tasks at the Rack Handler Operation Monitor window:
• follow the progress of each rack through the rack handler
• locate racks that contain sample tubes with non-read labels
• find a specific rack or tube currently on the rack handler
• skip un-sampled racks
• clear rack ID numbers where non-read ID samples occurs
• edit non-read tube IDs
Perform the following tasks at the universal rack handler:
• enter a sample ID for non-read labels at the Edit Non-Read Tube ID window
• obtain a summary of the current rack handler activity at the Data Monitor window
• view and print all the racks/samples processed by the rack handler on a day-by-day
basis at the Review Data window
2. Use the Review/Edit window on the ADVIA software to determine when results are
available.
Running an interrupt (STAT) sample
Running an interrupt sample when sampling is in progress (START)-SMP
LOAD NG
1. Download or create the sample workorder and select
workorder.
NOTE:
sample is already on the sample tray and already has a workorder.
2. At the Operation Panel, select
3. Load the new sample on the sample tray (STT).
4. At the Operation Panel, select
Running an interrupt sample when sampling has stopped (STOP)-SMP
LOAD OK
1. Select Interr. (interrupt) option on the sample workorder.
2. Load the sample on the sample tray (STT).
NOTE:
Assign or Sample confirmation window that displays after reading the barcoded
samples.
3. To begin sampling, at the Operation Panel, select
System Overview
Rack Handler Operation Monitor
You can also select the priority using the Cup/Tube Assign window if the
Pause
Start
Priority can be set using workorder Interr. designation and the Cup/Tube
or press
.
F8
. (interrupt) option on the
Interr
to halt sampling.
to resume sampling.
.
Start
on the menu bar,
View
89