Dmi Read - Toshiba QOSMIO G10 Maintenance Manual
Hide thumbs
Also See for QOSMIO G10:
- User manual (235 pages) ,
- User reference manual (31 pages) ,
- User manual (276 pages)
Table of Contents
Advertisement
3.2 Executing the Diagnostic Test
Select the option you want to execute and press Enter. When you select 1- SYSTEM
TEST, the following message will appear:
SYSTEM TEST NAME
SUB-TEST
PASS COUNT : XXXXX
WRITE DATA : XX
ADDRESS
SUB-TEST MENU :
01 - ROM checksum
02 – Fan ON/OFF
03 - Geyserville
04 - Quick charge
05 - DMI read
99 - Exit to DIAGNOSTIC TEST MENU
NOTE: The menu displayed by your computer may be slightly different from the one
shown above.
Select the desired subtest number from the subtest menu and press Enter. The following
message will appear:
TEST LOOP
ERROR STOP : YES (or NO)
Use the right and left arrow keys to move the cursor to the desired option.
Selecting YES of TEST LOOP increases the pass counter by one, each time the test cycle
ends and restarts the test cycle.
Selecting NO returns the process to the subtest menu after the test is complete.
3-6
XXXXXX
: XX
ERROR COUNT: XXXXX
READ DATA
: XXXXXX
STATUS
: YES (or NO)
3 Tests and Diagnostics
xxxxxxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] ; test end
[Ctrl]+[C]
; key stop
: XX
: XXX
QOSMIO G10 Maintenance Manual (960-497)
Advertisement
Chapters
Table of Contents
Troubleshooting
