Toshiba QOSMIO G10 Maintenance Manual page 272

Hide thumbs Also See for QOSMIO G10:

Table of Contents

4 Replacement Procedures

4. Remove the following screws securing the mic assembly and peel off the insulator

fixing the SD board.

5. Pulling out the SD board flat cable from the slot of cover assembly, remove the SD

board from the cover assembly with the mic assembly connected.

6. Turning over the SD board, disconnect the SD board flat cable from the connector

CN9510 on the system board.

SD board flat cable

QOSMIO G10 Maintenance Manual (960-497)

M2.0x4.0Z FLAT BIND

Figure 4-28 Removing the SD board

4.13 SD board / Microphone / MDC

Chapters

Table of Contents