hit counter script

Wireless Lan Card - Toshiba QOSMIO G10 Maintenance Manual

Hide thumbs Also See for QOSMIO G10:
Table of Contents

Advertisement

4.5 Wireless LAN card

4.5
Wireless LAN card
Removing a Wireless LAN card
The following describes the procedure for removing a Wireless LAN card (See Figure 4-7).
1. Remove the following screw securing wireless LAN card cover and remove it.
• B2.0 x 4.0Z
• B2.0 x 4.0B
2. Disconnect the wireless LAN antenna cable Main (white cable) and AUX (black
cable) from the connectors on a wireless LAN card.
3. Open the left and right latches holding a wireless LAN card and remove a wireless
LAN card from the connector CN2200 on the system board.
Wireless LAN card cover
Latch
CN2200
Wireless LAN antenna
cable (black cable)
4-16
BIND screw
or
LH STICK
AUX
Figure 4-7 Removing a wireless LAN card
4 Replacement Procedures
x1
x1
B2.0x4.0Z BIND
or
B2.0x4.0B LH STICK
Wireless LAN card
Wireless LAN antenna
cable (white cable)
MAIN
QOSMIO G10 Maintenance Manual (960-497)

Advertisement

Table of Contents
loading

Table of Contents