4.25 TV tuner module
6. Disconnect the TV antenna cable from the connector on the TV tuner module.
7. Disconnect the TV tuner harness from the connector on the TV tuner module.
8. Open the left and right latches holding the TV tuner module and remove the TV
tuner module from the connector CN2220 on the system board.
TV antenna cable
TV tuner harness
TV tuner module
4-70
Figure 4-49
Removing the TV tuner module
4 Replacement Procedures
TV tuner coaxial cable
CN2200
Latch
QOSMIO G10 Maintenance Manual (960-497)