Table of Contents
Advertisement
REFERENCE MANUAL
MODELS
A2
and
82
Pawl Release lever
Tob Interlock Lever
3 Tob
latch
Screw
Tab Lever
Figure 10. Tab Latch Screw Adjustment
4.
THE TAB OPERATING LINK is adjusted so that when
the cam is on the high point the tab latch screw will over-
throw the tab interlock lever by approximately .010" (Fig-
ure 11).
Rebound Check lever
Pawl Releos. lever
--=-==t
5 Rebound Check Slop
1-
.01S"
Tab Inl.rlodt lev ..
Figure 11. Tab Latching Adjustment
S.
THE REBOUND CHECK STOP should be formed so that
when the tab lever is latched the tip of the rebound check:
lever clears the tab rack by .015" with all tab stops cleared
(Figure 11).
(
6.
THE TAB LEVER EXTENSION serves two functions-
it acts as an overthrow stop for the tab lever and controls
the rest position of the rebound check: lever. Push the link
end of the tab operating lever toward the front of the ma-
12
Advertisement
Chapters
Table of Contents
