Camera Module - HP Compaq Presario,Presario B1201 Maintenance And Service Manual
Notebook pc
Hide thumbs
Also See for Compaq Presario,Presario B1201:
- Maintenance and service manual (278 pages) ,
- User manual (239 pages) ,
- Hardware and software manual (223 pages)
Table of Contents
Advertisement
Camera module
Description
Camera module
Before removing the camera module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the camera module:
Turn the computer right-side up, with the front toward you.
1.
Open the computer as far as possible.
2.
Remove the four rubber screw covers (1) and the four Torx T8M2.5×6.0 screws (2) that secure the
3.
display bezel to the display assembly.
Flex the outside edges of the left and right upper corners(1) of the display bezel until the bezel
4.
disengages from the display enclosure.
38
Chapter 4 Removal and replacement procedures
Battery on page
37).
Spare part number
454013-001
- Quick Links:
- Product Description
- Display Components
- Battery
- Memory Module
- Rtc Battery
Hide quick links:
Advertisement
Table of Contents
