Switch Cover - HP Compaq Presario,Presario B1201 Maintenance And Service Manual
Notebook pc
Hide thumbs
Also See for Compaq Presario,Presario B1201:
- Maintenance and service manual (278 pages) ,
- User manual (239 pages) ,
- Hardware and software manual (223 pages)
Table of Contents
Advertisement
Switch cover
Description
Switch cover (includes an LED board and LED board cable)
Before removing the switch cover, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the keyboard (see
5.
Remove the switch cover:
Turn the computer upside down, with the rear panel toward you.
1.
Remove the following:
2.
(1) Two rubber screw covers. The rubber screw covers are included in the Plastics Kit, spare part
number 454010-001.
(2) Three Phillips PM2.5×7.0 screws.
(3) Five Phillips PM2.0×3.0 screws.
Turn the computer right-side up, with the front toward you.
3.
Open the computer as far as possible.
4.
52
Chapter 4 Removal and replacement procedures
Battery on page
37).
Keyboard on page
50).
Spare part number
454005-001
- Quick Links:
- Product Description
- Display Components
- Battery
- Memory Module
- Rtc Battery
Hide quick links:
Advertisement
Table of Contents
