Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
Description
200-GB, 4200-rpm hard drive
160-GB, 5400-rpm hard drive
120-GB, 5400-rpm hard drive
80-GB, 5400-rpm hard drive
Before removing the hard drive, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the hard drive:
Position the computer with the front toward you.
1.
Loosen the four Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the
2.
computer.
Lift the rear edge of the hard drive cover (2), swing it up and forward, and remove the cover. The
3.
hard drive cover is included in the Plastics Kit, spare part number 454010-001.
Loosen the Phillips PM2.5×12.0 captive screw (1) that secures the hard drive to the computer.
4.
Battery on page
37).
Spare part number
454338-001
454337-001
454336-001
454335-001
Component replacement procedures
41