Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel.
Description
DVD/CD-RW Combo Drive
DVD-ROM Drive
Before removing the optical drive, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the optical drive:
Position the computer with the right side toward you.
1.
Remove the Torx T8M2.5×7.0 screw (1) that secures the optical drive to the computer.
2.
Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the tab
3.
to the right to release the optical drive from the computer.
Remove the optical drive (3) from the computer.
4.
If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward
5.
you.
Remove the two Phillips PM2.0×4.0 screws (1) that secure the optical drive bracket to the optical
6.
drive.
48
Chapter 4 Removal and replacement procedures
Battery on page
37).
Spare part number
454333-001
454334-001