Microphone
NOTE:
The microphone is included in the Cables Kit, spare part number 454008-001. See
Kit on page 21
Before removing the microphone, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Keyboard (see
c.
Switch cover (see
d.
Display assembly (see
e.
Top cover (see
f.
Bluetooth module (see
g.
Remove the microphone:
Disconnect the microphone cable (1) from the system board.
1.
Remove the microphone receiver (2) from the clip built into the base enclosure.
2.
68
Chapter 4 Removal and replacement procedures
for more Cable Kit information.
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Switch cover on page
Display assembly on page
Top cover on page
Bluetooth module on page
37).
41)
48)
50)
52)
54)
59)
65)
Cable