IBM x3690 X5 Service Manual page 218
Hide thumbs
Also See for x3690 X5:
- Installation and user manual (180 pages) ,
- Product manual (42 pages) ,
- At-a-glance manual (34 pages)
Table of Contents
Advertisement
Table 10. System x3690 X5 IMM error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
v See Chapter 4, "Parts listing, System x3690 X5 Types 7147, 7148, 7149, and 7192," on page 249 to determine which components
are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service
technician.
Event ID
Message
806f0123-2101xxxx
Reboot of system
[ComputerSystemElementName]
initiated by [WatchdogElementName]
806f0125-0b01xxxx
[ManagedElementName] detected as
absent
806f0125-0c01xxxx
[ManagedElementName] detected as
absent
806f0125-1801xxxx
[ManagedElementName] detected as
absent.
806f0125-1d01xxxx
[ManagedElementName] detected as
absent.
806f0125-1d02xxxx
[ManagedElementName] detected as
absent.
806f0125-1d03xxxx
[ManagedElementName] detected as
absent.
806f0125-1d04xxxx
[ManagedElementName] detected as
absent.
806f0125-1d05xxxx
[ManagedElementName] detected as
absent.
200
System x3690 X5 Types 7147, 7148, 7149, and 7192: Problem Determination and Service Guide
Severity
Description
Info
The IPMI Watchdog
Timer has expired.
A reboot of the
system was
initiated.
Info
The management
controller has
detected a Managed
Element is Absent.
Info
The management
controller has
detected a Managed
Element is absent.
Info
The management
controller has
detected a Managed
Element is absent.
Info
The management
controller has
detected a Managed
Element is Absent.
Info
The management
controller has
detected a Managed
Element is Absent.
Info
The management
controller has
detected a Managed
Element is Absent.
Info
The management
controller has
detected a Managed
Element is Absent.
Info
The management
controller has
detected a Managed
Element is Absent.
Action
Information only; no action
is required.
1. Riser card 1 is not
detected. Make sure that
it is properly seated and
connected.
2. Replace the riser card.
1. Make sure that the front
panel is properly seated
and connected.
2. Replace the front panel.
1. Make sure that the
memory tray is properly
seated and connected.
2. Replace the memory
tray.
1. Fan 1 is not detected.
Make sure that it is
properly seated and
connected.
2. Replace fan 1.
1. Fan 2 is not detected.
Make sure that it is
properly seated and
connected.
2. Replace fan 2.
1. Fan 3 is not detected.
Make sure that it is
properly seated and
connected.
2. Replace fan 3.
1. Fan 4 is not detected.
Make sure that it is
properly seated and
connected.
2. Replace fan 4.
1. Fan 5 is not detected.
Make sure that it is
properly seated and
connected.
2. Replace fan 5.
Advertisement
Table of Contents
