Table of Contents
Advertisement
Quick Links
AU: 1800 029 70 1
NZ: 0800 466 444
When laying concrete slab, ensure there
is a rebated edge 25mm deep around the
perimeter. This will help water egress from
the base of the shed.
shed. For further assistance please visit our detailed
MANU FACTURED
IN AUSTRALIA
At ABSCO Industries we are always looking to be
number ONE, so please let us know what you think
SNAPTiTE
Assembly
ABSCO INDUSTRIES
Absco Industries
Assembly Instruction Manual
ABSCO SPACE SAVER SHED
MODEL: 15081SK
1.52mW x 0.78mD x 1.80mH, 1.95mH
admin@absco.com.au
www.abscosheds.com.au
WHEN LAYING YOUR CONCRETE
SLAB, ENSURE THERE IS A
REBATED EDGE 25mm DEEP
AROUND THE PERIMETER
THIS WILL HELP WATER EGRESS
FROM THE BASE OF THE SHED
We thank you for choosing an Australian made
instructional video library at
Http://www.abscosheds.com.au/watch-videos
of our instructions. Feedback makes us better.
feedback@absco.com.au
ASSEMBLY INSTRUCTION MANUAL
Absco Industries
Premier Shed Model: 23151GK
Download the Absco
Sheds Assembly App
for instructional videos
SHED MODEL: 23151GK
Model: 15081SK
日本更新日 ： 2021/4/28
FRONT: 2.26m
SIDE:
1.52m
HEIGHT: 1.95m
BOTTOM CHANNEL
REBATED EDGE
75mm WIDE REBATE
CONCRETE SLAB
21-11-2017
11/11/19
1.1
PAGE 01
1
Advertisement
Table of Contents
Related Manuals for ABSCO SHEDS 15081SK
Summary of Contents for ABSCO SHEDS 15081SK
- Page 1 ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH AU: 1800 029 70 1 admin@absco.com.au 日本更新日 ： 2021/4/28 NZ: 0800 466 444 www.abscosheds.com.au Absco Industries Premier Shed Model: 23151GK FRONT: 2.26m SIDE: 1.52m HEIGHT: 1.95m WHEN LAYING YOUR CONCRETE...
-
Page 2: General Instructions
ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH GENERAL INSTRUCTIONS • Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details. • Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on "COMPONENTS PACKING LIST"... -
Page 3: Component Description
ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH COMPONENT PACKING LIST Check off all components. COMPONENT PART COMPONENT PART CHECK CHECK DESCRIPTION DESCRIPTION STEEL SHEET 1915 X 773mm CHANNEL L = 1513mm STEEL SHEET CHANNEL 1915mm X 773mm... - Page 4 ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH COMPONENT PACKING LIST Check off all components. PART COMPONENT PART COMPONENT CHECK CHECK DESCRIPTION DESCRIPTION CHANNEL WITH HINGES JAMB L= 1785mm L = 1725mm CHANNEL JAMB L= 783mm...
- Page 5 ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.
- Page 6 ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH WALL AND ROOF COMPONENT OVERVIEW Absco Industries Assembly Instruction Manual Model: 15081SK 11/11/19...
-
Page 7: Rear Panel Assembly
ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH REAR PANEL ASSEMBLY 1x required Absco Industries Assembly Instruction Manual Model: 15081SK 11/11/19... -
Page 8: Side Panel Assembly
ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH SIDE PANEL ASSEMBLY 2x required. Absco Industries Assembly Instruction Manual Model: 15081SK 11/11/19... - Page 9 ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH ROOF PANEL ASSEMBLY Absco Industries Assembly Instruction Manual Model: 15081SK 11/11/19...
-
Page 10: Front Panel Assembly
ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH FRONT PANEL ASSEMBLY Absco Industries Assembly Instruction Manual Model: 15081SK 11/11/19... - Page 11 ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH DOOR PANEL ASSEMBLY SINGLE DOOR Vertical door channels are installed in the opposite orientation compared to the horizontal door channels. Long Short fl ange fl ange of of channel...
-
Page 12: Door Panel Assembly
ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH DOOR PANEL ASSEMBLY SINGLE DOOR PANEL NOTE: Nuts and bolts are also supplied and may be used instead of rivets. Use a 4mm drill bit to enlarge these holes in the jamb NOTE: The holes to fasten the padbolt hasp are not pre-punched to allow for proper alignment. - Page 13 ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH PANEL CONSTRUCTION NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel are pre-punched for attaching roof sheeting. The base channels are not pre-punched.
- Page 14 ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH FINAL CONSTRUCTION ANCHORING OF SHED Location of 8 concrete anchors Bolt and Nut* M10 4.6/S Wall Sheet Steel Angle* 35 x 35 x 3 Each anchor consists of one nut, bolt, M10 dynabolt and steel angle.
- Page 15 ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH Absco Skillion Roof Shed Notes General • 1.G This instruction manual shall be read in conjunction with other consultants drawings, specifi cations and written instructions provided by Absco and/or their representatives.
- Page 16 ABSCO SPACE SAVER SHED MODEL: 15081SK 1.52mW x 0.78mD x 1.80mH, 1.95mH Absco Skillion Roof Shed Notes Steelwork • 1.S All structural steelwork shall have a corrosion protection system applied consistent with AS/NZS 2312- 2002. • 2.S All structural steelwork detailed within this installation manual shall be minimum Grade 550 for roll formed sections (including roof and wall sheeting) and Grade 250 for angle sections.
- Page 17 Absco Sheds Storage Guidelines • Absco Sheds are designed to be weatherproof for normal weather conditions. In the event of extreme weather conditions such as heavy rain, combined with high wind gusts, the ridge capping, sheeting joins, screw fi xings etc., may exhibit minor deformations which may allow some water entry. These areas should be checked regularly to ensure that maximum strength and protection is maintained.
- Page 18 1.52mW x 0.78mD x 1.80mH, 1.95mH Australia Product Warranty Against Defects • Absco Sheds, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel. • We are pleased to advise we warrant that the steel coating will not rust, crack, fl ake peel or blister for 20 years from date of purchase, when installed within Australia.