Advertisement
Quick Links
AU: 1800 029 701
+1 (866) 788 3046
+1 (866) 788 3046
N Z: 0800 466 444
Absco Industries
Assembly Instruction Manual
ABSCO WOOD STORE
MODEL: 1208WSK-PTX
4' W x 2'10" D x 3'9" H
admin@absco.com.au
admin@absco.com.au
www.abscogardensheds.com
www.abscosheds.com.au
PLEASE LEAVE A REVIEW
www.abscosheds.com.au/review
Model: 1208WSK-PTX
Australian Made
14/12/23
2.0
1
Advertisement
Related Manuals for ABSCO SHEDS 1208WSK-PTX
Summary of Contents for ABSCO SHEDS 1208WSK-PTX
- Page 1 ABSCO WOOD STORE MODEL: 1208WSK-PTX 4’ W x 2’10” D x 3’9” H Australian Made PLEASE LEAVE A REVIEW AU: 1800 029 701 admin@absco.com.au admin@absco.com.au +1 (866) 788 3046 +1 (866) 788 3046 www.abscosheds.com.au/review N Z: 0800 466 444 www.abscogardensheds.com www.abscosheds.com.au...
- Page 2 ABSCO WOOD STORE MODEL: 1208WSK-PTX 4’ W x 2’10” D x 3’9” H Australian Made GENERAL INSTRUCTIONS SAFETY NOTES • Before commencing any assembly, read • Some parts may have sharp edges. It is through these instructions in detail to gain...
- Page 3 ABSCO WOOD STORE MODEL: 1208WSK-PTX 4’ W x 2’10” D x 3’9” H Australian Made COMPONENT PACKING LIST Check off all components. DESCRIPTION PART # DESCRIPTION PART # STEEL SHEET STEEL SHEET 44.5” x 30.4” 34” x 30.4” STEEL SHEET STEEL SHEET 44.5”...
- Page 4 ABSCO WOOD STORE MODEL: 1208WSK-PTX 4’ W x 2’10” D x 3’9” H Australian Made SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.
- Page 5 ABSCO WOOD STORE MODEL: 1208WSK-PTX 4’ W x 2’10” D x 3’9” H Australian Made REAR PANEL ASSEMBLY 1x required. 1. Place the 44J sheet with the edge holes as shown. Orientate the 44B sheet so holes are as shown Overlap the sheets by four ribs.
- Page 6 ABSCO WOOD STORE MODEL: 1208WSK-PTX 4’ W x 2’10” D x 3’9” H Australian Made ROOF PANEL ASSEMBLY 1. Place the 44T sheet with the 1x required. two pan holes as shown. Orientate the 44B sheet so holes are as shown Overlap the sheets by three ribs.
- Page 7 ABSCO WOOD STORE MODEL: 1208WSK-PTX 4’ W x 2’10” D x 3’9” H Australian Made LEFT PANEL ASSEMBLY 1x required. 1. Orientate the 44J sheet as shown. 2. Attach the top and bottom channels using the SNAP-TiTE method. Make sure you have the shorter, 0.6”...
- Page 8 ABSCO WOOD STORE MODEL: 1208WSK-PTX 4’ W x 2’10” D x 3’9” H Australian Made RIGHT PANEL ASSEMBLY 1x required. 1. Orientate the 44A sheet as shown. 2. Attach the top and bottom channels using the SNAP-TiTE method. Make sure you have the shorter, 0.6”...
- Page 9 ABSCO WOOD STORE MODEL: 1208WSK-PTX 4’ W x 2’10” D x 3’9” H Australian Made SHELF PANEL ASSEMBLY 1x required. 1. Attach the end channels to the 44K sheet using the SNAP- TiTE method. Make sure you have the shorter, 0.6”...
- Page 10 ABSCO WOOD STORE MODEL: 1208WSK-PTX 4’ W x 2’10” D x 3’9” H Australian Made PANEL CONSTRUCTION Make sure to have the wall panels orientated correctly with all holes intended for the shelf to the top. 1. Start with the rear and left panel.
- Page 11 ABSCO WOOD STORE MODEL: 1208WSK-PTX 4’ W x 2’10” D x 3’9” H Australian Made ANCHORING It’s best practice to anchor this structure to a concrete slab as shown. Each anchor consists on one nut, bolt, dynabolt and steel angle.