Advertisement
Quick Links
Quick Installation Guide
Hitachi Deskstar 7K3000
& Deskstar 5K3000
Models:
HDS723030ALA640
HDS723020BLA642
HDS723015BLA642
HDS5C3030ALA630
HDS5C3020ALA632
HDS5C3015ALA632
System Requirements for Serial ATA
The following are needed to install a Serial ATA
(SATA) drive to a system:
•
SATA capable motherboard or controller card
•
SATA hard drive
•
SATA cable (1 meter or less in length)
Handling precautions
Set the drive down gently to prevent damage
from impact or vibration.
Do not open the ESD bag containing the drive
until needed.
Handle the drive carefully by the edges. Do not
touch the exposed printed circuit board or any
electronic components.
Do not press on the top or bottom of the drive.
Before handling the drive, discharge any static
electricity from yourself and your clothing. With
one hand, touch an unpainted metal surface on
your computer chassis, then touch the ESD bag
with the other hand. Remain in contact with the
chassis and the bag for a minimum of two
seconds.
Page 1
All manuals and user guides at all-guides.com
Quick installation procedure
Note: Back up all data before installing drive.
Mounting instructions
Note: The mounting hole and connector locations are
shown in figures 1 and 2.
1. Turn off the computer.
2. Unplug the computer.
3. Remove the computer cover as instructed by
the computer system manual.
4. Discharge static electricity (see Handling
precautions).
5. Note the mounting position of existing drives
and cables. If you are replacing a drive or any
cable, remove it now.
6. Remove the drive from the ESD bag.
7. Record the model, the part number, and the
serial number of the drive for future reference.
8. Attach the Serial ATA cable to the drive. Match
key on cable to connector on drive
1. Mount the drive securely.
2. Verify all attachments.
3. Replace the computer cover.
4. Plug in the computer.
5. Turn on the computer.
6. Verify that the hard disk is recognized by the
BIOS. Instructions for accessing your BIOS
can be found in the computer system manual
or in the motherboard manufacturer
documentation. If the drive is not recognized in
the BIOS, check the following:
version 1.0
Advertisement
Related Manuals for Hitachi Deskstar 7K3000
Summary of Contents for Hitachi Deskstar 7K3000
- Page 1 All manuals and user guides at all-guides.com Quick Installation Guide Hitachi Deskstar 7K3000 & Deskstar 5K3000 Models: HDS723030ALA640 HDS723020BLA642 HDS723015BLA642 HDS5C3030ALA630 HDS5C3020ALA632 HDS5C3015ALA632 Quick installation procedure System Requirements for Serial ATA Note: Back up all data before installing drive. The following are needed to install a Serial ATA (SATA) drive to a system: 1.
- Page 2 All manuals and user guides at all-guides.com Hitachi Global Storage Technologies Interface connector Thread 6-32UNC 41.28±0.5 44.45±0.2 95.25±0.2 6.35±0.2 28.5±0.5 60.0±0.2 41.6±0.2 Figure 1: Mounting holes locations (all dimensions are in mm) Figure 2: Connector location (all dimensions are in mm)
- Page 3 Hitachi trademarks. References in this publication to Hitachi products, programs or services do not imply that Hitachi intends to make these available in all countries in which it operates. Some countries have laws that may affect encryption-enabled devices.