Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt
in a safe and dry place for future reference.
20v LITHIUM-ION
For Best results,
use 3.0 amp Hour Battery
or Greater.
(Sold Separately)
VARIABLE - SPEED
ROTARY TOOL WITH FLEXIBLE SHAFT
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
231210C-B
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS ManuaL.
23d
58672
Advertisement
Related Manuals for Harbor Freight Tools Bauer 231210C-B
Summary of Contents for Harbor Freight Tools Bauer 231210C-B
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SaVe tHiS ManuaL.
-
Page 2: Table Of Contents
table of contents Safety ............2 Operation ............15 Specifications ..........10 Maintenance ..........18 Setup .............11 Warranty ............20 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. -
Page 3: Safety
electrical Safety 1. power tool plugs must match 4. Do not abuse the cord. never use the the outlet. never modify the plug cord for carrying, pulling or unplugging in any way. Do not use any adapter the power tool. Keep cord away from plugs with grounded power tools. - Page 4 3. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Page 4 For technical questions, please call 1-888-866-5797. Item 58672...
- Page 5 Battery tool use and care 1. prevent unintentional starting. Ensure the 8. Do not expose a battery pack or power switch is in the off-position before connecting tool to fire or excessive temperature. to battery pack, picking up or carrying the Exposure to fire or temperature above power tool.
- Page 6 Lithium Battery Safety Warnings 2. DO nOt DO any OF tHe FOLLOWinG tO tHe Battery pacK: • Open, • Drop, • Short-circuit, • puncture, LitHiuM BatterieS StOre a • incinerate, or LarGe aMOunt OF enerGy • expose to temperatures anD WiLL Vent Fire Or greater than 140°F.
- Page 7 8. Wear personal protective equipment. 13. never lay the power tool down until the Depending on application, use face accessory has come to a complete stop. shield, safety goggles or safety glasses. The spinning accessory may grab the surface as appropriate, wear dust mask, hearing and pull the power tool out of your control.
- Page 8 Kickback and related Warnings Kickback is a sudden reaction to a pinched or 2. use special care when working corners, snagged rotating wheel, backing pad, brush sharp edges etc. Avoid bouncing and or any other accessory. Pinching or snagging snagging the accessory. Corners, sharp causes rapid stalling of the rotating accessory edges or bouncing have a tendency which in turn causes the uncontrolled power...
- Page 9 5. When wheel is pinched, snagged or 7. Support panels or any oversized when interrupting a cut for any reason, workpiece to minimize the risk of wheel switch off the power tool and hold the pinching and kickback. Large workpieces power tool motionless until the wheel tend to sag under their own weight.
-
Page 10: Specifications
Grounding tO preVent eLectric SHOcK anD DeatH FrOM incOrrect GrOunDinG: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. never remove the grounding prong from the plug. Do not use the charger if the power cord or plug is damaged. -
Page 11: Setup
Setup - Before use: read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the power Switch is in the off-position and unplug the tool from it’s electrical outlet before performing any procedure in this section. - Page 12 recommended accessory Speeds When adjusting the Speed Dial, a distinct change in sound will occur at select intervals: • 1 ‑ 5,000 RPM • 4 ‑ 22,000 RPM • 2 ‑ 11,000 RPM • 5 ‑ 26,000 RPM • 3 ‑ 16,000 RPM •...
- Page 13 Steel aluminum, Soft Hard plastics, Stone/ part Description (ferrous Brass, (non- ceramic Glass Wood Wood Laminates Shell metals) ferrous metals) Steel Saw Blades Ø 1 ‑1/4" 15 ‑ 2 0K 15 ‑ 2 0K Ø 1 " 15 ‑ 1 8K 19 ‑ 2 0K 15 ...
- Page 14 accessories • Mounted Stones - Use for sharpening • Buffing Wheels ‑ Use for polishing. cutting tools, etc, deburring metal Use Mandrel with shank and threads after cutting, and removing excess on the end for polishing wheels. material on metal and ceramics. Buffing Wheel Mandrel...
-
Page 15: Operation
Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set up tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: turn the power Switch of the tool off, wait for the motor to stop, before adjusting tool or installing accessories. - Page 16 accessory installation WarninG! tO preVent SeriOuS inJury: 3. To insert an accessory: Insert the shank Use only rotary accessories of the correct end of the accessory into the Collet once the shank diameter for the collet. Use only rotary Collet Nut is loose. accessories suitable for the speed of the tool.
- Page 17 General Operating instructions tO preVent SeriOuS inJury WHiLe in OperatiOn: use personal protective equipment. always wear eye protection. Wear anSi-approved safety goggles with side shields. power Speed 1. Slide Power Switch to OFF position, Switch Dial then insert a fully charged Battery Pack making sure it clicks into place.
-
Page 18: Maintenance
Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: turn the power Switch off and wait for tool to completely stop before performing any inspection, maintenance, or cleaning procedures. tO preVent SeriOuS inJury FrOM tOOL FaiLure: Do not use damaged equipment. - Page 19 troubleshooting problem possible causes Likely Solutions Tool will not start. 1. Battery Pack not 1. Remove Battery Pack, make sure there properly connected. are no obstructions, reinsert the Battery Pack according to its shape (it should only fit one way), and press firmly until the Battery Pack locks in place.
-
Page 20: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This...