Changing To Modify Mode - Hitachi 9900 V Series User Manual
Lun expansion and virtual lvi/lun
Hide thumbs
Also See for 9900 V Series:
- User and reference manual (138 pages) ,
- Architecture manual (80 pages)
Table of Contents
Advertisement
2.3
Changing to Modify Mode
If you are going to implement any changes for LUN Expansion or Virtual LVI/LUN, you must
be in Modify mode. The subsystem information icons (see Figure 2.2) are on the upper right
corner of the Remote Console Main panel, and they appear on all option panels as well.
These icons are described in detail in Hitachi Freedom Storage™ Lightning 9900™ V Series
Remote Console – Storage Navigator (MK-92RD101). If you want to change from View mode
to Modify mode and back, two of the icons are important:
The exclusive lock icons indicate the operation mode of all currently logged-in users. If
all users are operating in View mode, the Unlocked icon ( ) is displayed. If a user is
operating in Modify mode, or if subsystem maintenance or SNMP operations are being
performed, the Locked icon ( ) is displayed.
The Mode-Changing buttons allow users to change the operation mode between View
mode (
To change between View mode to Modify mode:
1. You must have administrator or write access for the option that you want to use. For
details on assigning user access, see Hitachi Freedom Storage™ Lightning 9900™ V Series
Remote Console – Storage Navigator (MK-92RD101).
2. Verify that the subsystem is unlocked. If all users are operating in View mode, the
Unlocked icon ( ) and the View Mode icon (
is operating in Modify mode, or if subsystem maintenance is being performed, the
Locked icon ( ) is displayed, and you will not be able to change to Modify mode.
3. Select the Mode Changing icon, which should be in View mode (
and a confirmation message will display (see Figure 2.3). Select OK.
4. The Mode Changing icon will change from View mode to Modify mode (
Locked icon ( ) will be displayed (see Figure 2.4).
5. Once you have applied your desired changes, you need to change back to View mode.
Select the Mode Changing icon (
2.3). Select OK, and you will be back in View mode.
Hitachi Lightning 9900™ V Series LUN Expansion and Virtual LVI/LUN User's Guide
PRELIMINARY RELEASE
) and Modify mode (
). Note: Only one user at a time can be in Modify mode.
) are displayed (see Figure 2.2). If a user
). The confirmation message will display (see Figure
). Select on the icon,
), and the
13
Advertisement
Table of Contents
