Table of Contents
Advertisement
TV output signal
Refer also to your Personal Conferencing Kit's documentation.
Problem
Display on TV is poor
No display
USB
Refer also to your USB device's documentation.
Problem
USB device does not
work
User's Manual
Procedure
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
Try adjusting the contrast and brightness con-
trols on the external monitor.
Press hot keys FN + F5 to change the display.
Refer to Chapter 5,
NOTE: If you turn the computer off in
Resume mode while the display is on TV,
the computer will select either the inter-
nal LCD or an external computer CRT
as the display device.
If problems persist, contact your dealer.
Procedure
Check for a firm cable connection between the
USB ports on the computer and the USB device.
Make sure the USB device drivers are properly
installed. Refer to your Windows documentation
for information on checking the drivers.
If you are using an operating system that does
not support USB, you can still use a USB mouse
and/or USB keyboard. If these devices do not
work, make sure the USB KB/Mouse Legacy
Emulation item in HW Setup is set to Enabled.
If problems persist, contact your dealer.
Troubleshooting
The
Keyboard.
9-19
Hide quick links:
Advertisement
Table of Contents
