Download Print this page

Firebricks; Lighting Your Fire; Initial Operation Period - Nectre Fireplaces 800 Operating Instructions Manual

Wall fire heater

Hide thumbs Also See for 800:

Table of Contents

FIREBRICKS

The firebricks are designed to fit in the base and along the rear and side walls of

the firebox. Please ensure the bricks are fitted before using the fire.

1) Place firelighters and pieces of crumpled newspaper in firebox floor.

2) Cover the paper with small diameter split kindling.

3) Place 3 - 4 small pieces of firewood on top of the kindling.

4) Open air slide fully.

5) Light several parts of the newspapers.

6) Close the door to avoid smoke spillage. Do not close latch, this will allow

extra air into the firebox and helps create a draft.

After approximately 10 minutes:

7) Once firewood is fully ignited, CLOSE DOOR FULLY.

Operate your first few fires with the fan on high to allow the high temperature

paint to cure.

NOTE: For the first few fires the high temperature paint curing may cause an

odour. Ensure sufficient ventilation is supplied to allow dissipation of any smoke

and odour.

THIS ODOUR IS NORMAL

Table of Contents

Show Quick Links

Table of Contents