Download Print this page

Nectre 800 Wall Heater - Suggested Framing - Nectre Fireplaces 800 Operating Instructions Manual

Wall fire heater

Hide thumbs Also See for 800:

Table of Contents

NECTRE 800 WALL HEATER – SUGGESTED FRAMING

The diagram on the next page shows a suggested wall enclosure for the Nectre

800 Wall Heater. Assuming a ceiling height of 2400mm, a timber frame has been

constructed using 90x35mm timber, 2400mm high, 1200mm wide, and 525mm

deep. With timber supports for the steel cross bearers at 390mm high, the base

of the heater will be 590mm above the floor.

A non-combustible material such as Versalux fibro cement sheeting is used on

the front wall, and standard gyprock or equivalent can be used on the side walls.

Vents have been positioned top and bottom on both side walls.

This construction complies with the minimum clearance requirements.

The height of the heater above the floor and/or the width of the enclosure may be

varied as long as it meets the clearances defined above.

Table of Contents

Show Quick Links

Table of Contents