Notes On Application Of These Project Planning Instructions; Tools Required - Siemens SIGMASYS C Manual

Multifunctional danger control and indicating panels

page of 138

/ 138
Contents
Table of Contents
Bookmarks

Table of Contents

2 Important notes

The technical regulations introduced below apply in respect of the Federal Republic of Ger-

many. Users in other countries must be sure to comply with all applicable local regulations.

Danger alarm systems must be installed in accordance with Appendix 1 to DIN VDE 0833 'Di-

rectory of relevant standards for electrical safety' (previously from the DIN VDE 0800 series of

standards). Furthermore, all installation, extension, modification and operation activities must

be performed in accordance with DIN VDE 0833 ('installation' in this instance refers to plan-

ning, installation, commissioning and maintaining).

Installation and commissioning of the Voice Alarm System E100 may only be carried out by

an electrical specialist.

This specialist must furthermore be trained in the installation and commissioning of the E100

system.

Extract from DIN VDE 0833:

An electrical specialist is someone whose specialist training, knowledge and experi-

ence as well as knowledge of the relevant standards allows them to evaluate the task be-

fore them and recognize potential dangers.

Many years of experience in the relevant field are also acceptable in place of specialist

training. Furthermore, for the field of danger alarm systems engineering it is necessary to

have additional training, knowledge and experience of the electrical engineering fields of

danger alarm systems engineering, telecommunications technology, process data process-

ing and heavy current technology

2.1