PRG Professional Ranges Care and Use
Before Using Your Range for the First Time
Remove all packaging
materials and tempo-
rary labels from oven
and cooktop.
RACK POSITIONS
Large All-Gas Main Oven
(PRG304, PRG36 and
PRG48 Models)
3
2
1
All-Gas Secondary Oven
(PRG48 Models only)
3
2
1
Downloaded from
www.Manualslib.com
1. Check that you have the items listed on Page 6.
2. Record the Model and Serial number as described on Page 36
3. Optional Accessories. Grill Cover, Chopping Board, Griddle, and
4. Position the racks correctly in the oven.
The correct rack position depends on the recipe and the cooking mode.
The rack positions are numbered from the bottom of the oven,
like an elevator. Rack position 2 is the most frequently used position.
Place rack(s) in the proper position before turning on the oven. For all
models insert and remove racks as follows:
Insert the racks as follows:
Remove or reposition the racks as follows:
Aluminum foil should never be used to cover the oven racks
or to line the oven. It may cause damage to the oven if it
touches the infrared broiler or when heat is trapped be-
neath it.
Before baking or broiling for the first time, the oven and broiler should be
turned on separately to burn off the manufacturing oils. Turn the oven on
to 450˚F. for 20 to 30 minutes; then turn the broiler to "Broil" for same
length of time. You may wish to turn on the ventilator above your range
during this time.
Please read Page 34 in Section 6: Care and Maintenance before cleaning
the oven racks.
manuals search engine
see "Data Rating Plate." These may be used for any future
contacts with your servicer or the factory. Enter this information on
the Product Registration Card included with this product; then mail it
to the indicated address to receive your free Thermador Profes-
sional® Cookbook.
other accessories are available from your Thermador Dealer. Contact
the Thermador Parts Department toll-free at 800/735-4327 for more
information.
a. Hold the rack with the back rail in the up position towards the rear
of the oven. Slip it into the oven so the rack slides are between the
rack and the rack guides.
b. Tip the front of the rack up slightly as it slides into the oven so that
the safety stops clear the rack slides. The safety stops on the back
of the rack will keep it from sliding out of the oven when it is pulled
forward.
a. Pull the rack forward,
b. Lift the front of the rack up so the safety stops clear the rack slides.
c. Pull the rack forward to remove.
Caution
Page 7
Section Two: Before You Begin