Thermador VCI230DS Installation Manual
Ventilation
Hide thumbs
Also See for VCI230DS:
- Use & care manual (104 pages) ,
- Installation manual (27 pages) ,
- Design manual (62 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Thermador VCI230DS
Summary of Contents for Thermador VCI230DS
-
Page 1: Installation Manual
VENTILATION INSTALLATION MANUAL MODEL: VCI 230/236/248 DS... -
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read All Instructions Before Using the Appliance. WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOW- ING: Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire- related construction. - Page 3 VTI 610 D Accessories Wired Remote Control VCI 2 REM VTI 610 D VTR 630 D VTI 1010 D VTR 1030 D VTR 1500 BAFFLT-30 BAFFLT-36 BAFFLT-48 PAGE 2 VTR 1500 (+ Accessories)
- Page 4 IMPORTANT INFORMATION: Old appliances are not worthless junk. Valuable raw materials can be reclaimed by recycling old appliances. Before disposing of your old appliance, render it unusable. You received your new appliance in a protective shipping carton. All packaging materials are environmen- tally friendly and recyclable.
-
Page 5: Before Installation
BEFORE INSTALLATION EXHAUST-AIR MODE The exhaust air is discharged upwards through a duct or directly through an exterior wall to the outdoors. Exhaust air should neither be directed into a smoke or exhaust flue (chimney) that is currently used for other pur- poses nor into a duct that is used for ventilating rooms in which stoves or fireplaces are also located. -
Page 6: Step 2: Preparing The Installation
BEFORE INSTALLATION Step 1: PREPARING THE CUTOUT ❑ The wall must be flat and vertical. ❑ Make sure that the wall is capable of providing a firm hold for mounting screws and plugs. Weight in kg: XX.XX. Step 2: PREPARING THE INSTALLATION There are two mounting methods: Installation in wooden framework or Installation with the mounting brackets provided. -
Page 7: Step 3: Electrical Connection
Step 3: ELECTRICAL CONNECTION WARNING: THIS APPLIANCE MUST BE GROUND- The hood should only be connected to a grounded sock- et that has been installed according to relevant regula- tions. If possible, place the grounded socket directly behind the chimney paneling. Attach the grounded socket as close to the appliance as possible and in an accessible location. -
Page 8: Step 4: Connecting The Unit
Step 4: CONNECTING THE UNIT There are two operating modes: with flange mounted blower or with external blower Operating mode with flange mounted blower in combination with VTI 610 D only. Remove blower assembly ductwork. Remove hood ductwork. Keep the screws! Match the hood exhaust opening with the blower intake opening. -
Page 9: Step 6: Verify Installation, Operation And Cooktop Alignment
Also refer to the Care & Use Manual for additional information, or call Thermador Customer Support at 1-800-735-4328. PAGE 8...